How To Initialize The Tire Pressure Warning System - Lexus CT 200h Owner's Manual

■

How to initialize the tire pressure warning system

Park the vehicle in a safe place and turn the "POWER" switch off.
STEP 1
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire inflation
STEP 2
pressure level. (P. 685)
Make sure to adjust the tire pressure to the specified cold tire inflation
pressure level. The tire pressure warning system will operate based on
this pressure level.
Turn the "POWER" switch to ON mode.
STEP 3
STEP 4
Wait for a few minutes with the "POWER" switch in ON mode
STEP 5
and then turn the "POWER" switch off.
CT200h_OM_OM76066U_(U)
4-3. Do-it-yourself maintenance
Press and hold the tire pressure
warning reset switch until the tire
pressure warning light blinks
slowly 3 times.
4
549