Before Recharging; After Recharging/Reconnecting The 12-Volt Battery - Lexus CT 200h Owner's Manual

Hide thumbs Also See for CT 200h:
Table of Contents

Advertisement

4-3. Do-it-yourself maintenance

Before recharging

When recharging, the 12-volt battery produces hydrogen gas which is flammable
and explosive. Therefore, observe the following precautions before recharging:
If recharging with the 12-volt battery installed on the vehicle, be sure to discon-
nect the ground cable.
Make sure the power switch on the charger is off when connecting and discon-
necting the charger cables to the 12-volt battery.

After recharging/reconnecting the 12-volt battery

Unlocking the doors using the smart access system with push-button start may
not be possible immediately after reconnecting the 12-volt battery. If this hap-
pens, use the wireless remote control or the mechanical key to lock/unlock the
doors.
Start the hybrid system with the "POWER" switch in ACCESSORY mode. The
hybrid system may not start with the "POWER" switch turned OFF. However,
the hybrid system will operate normally from the second attempt.
The "POWER" switch mode is recorded by the vehicle. If the battery is recon-
nected, the vehicle will return the "POWER" switch mode to the status it was in
before the battery was disconnected. Make sure to turn off the power before
disconnect the battery. Take extra care when connecting the battery if the
"POWER" switch mode prior to discharge is unknown.
Restart the hybrid system, depress the brake pedal, and confirm that it is possi-
ble to shift into each shift position.
If the system will not start even after multiple attempts at all methods above, contact
your Lexus dealer.
542
CT200h_OM_OM76066U_(U)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents