2-1. Driving procedures
Power (ignition) switch
Performing the following operations when carrying the electronic key on
your person starts the hybrid system or changes "POWER" switch modes.
■
Starting the hybrid system
Check that the parking brake is set.
STEP
1
Firmly depress the brake pedal.
STEP
2
Check that the "POWER" switch indicator turns green. If the indica-
tor does not turn green, the hybrid system cannot be started.
When the shift position is N, the hybrid system cannot start. Shift the
shift position to P when starting the hybrid system. (P. 187)
STEP
3
CT200h_OM_OM76066U_(U)
Press the "POWER" switch.
Continue depressing the brake
pedal until the hybrid system is
completely started.
The hybrid system can be
started from any "POWER"
switch mode.
2
175