2-1. Driving procedures
Turn signal lever
The turn signal lever can be used to show the following intention of the
driver:
Turn signals can be operated when
■
The "POWER" switch is in ON mode.
If the indicator flashes faster than usual
■
Check that a light bulb in the front or rear turn signal lights has not burned out.
CT200h_OM_OM76066U_(U)
Right turn
Left turn
Lane change to the right
(push and hold the lever part-
way)
The right hand signals will flash
until you release the lever.
Lane change to the left (push
and hold the lever partway)
The left hand signals will flash
until you release the lever.
2
193