Atm - D-Link DSL-4320L User Manual

Section 4 - Configuration
On this page you can configure your Asynchronous Transfer Mode (ATM) settings. If you are unsure, you can obtain these settings from your ISP.
Interface: Select the ATM interface from the drop-down menu.
VPI: Enter the Virtual Path Indicator (0 - 255).
VCI: Enter the Virtual Channel Indicator (32 - 65535).
Latency: Select the latency from the drop-down menu.
Encapsulation: Select the method of encapsulation provided by your ISP. You can
select LLC or VCMUX.
ATM QoS: Select the Quality of Service type from the drop-down menu.
Click Save when you are done.
D-Link DSL-4320L User Manual

ATM

79