D-Link DSL-4320L User Manual page 72

Section 4 - Configuration
In the Settings menu on the bar on the top of the page, click Internet to see the
Internet configuration options. Click Advanced Settings... to expand the list and
see all of the options.
WAN Access Select whether the device should act as an xDSL Router or a
Residential Gateway.
Type:
PVC: Use the default setting unless otherwise instructed by your ISP.
If you selected Residential Gateway, sselect the Ethernet port that
Ether WAN Port:
will connect to the WAN. Use this setting if you do not intend to use
the built-in DSL modem.
Enable Tagged Enable or disable tagged VLAN.
Vlan:
VLAN ID: Enter the VLAN ID.
VLAN Priority: Enter the VLAN Priority from the default 0 (lowest) to 7 (highest).
My Internet Choose your Internet connection type from the drop-down menu.
Connection Is: You will be presented with the appropriate options for your
connection type.
For Dynamic IP (DHCP) refer to Dynamic IP (DCHP) on page 69.
For Static IP refer to Static IP on page 70.
For PPPoE refer to PPPoE on page 71.
For PPPoA refer to PPPoA on page 72.
For PPTP refer to PPTP on page 73.
For L2TP refer to L2TP on page 75.
For Bridge refer to Bridge on page 77.
D-Link DSL-4320L User Manual 68