Atm Settings - D-Link dsl-526e User Manual

Configuration

ATM Settings

Choose Setup > Internet Setup > ATM Settings. The ATM Settings page appears.
You may configure the parameters for the ATM of your ADSL Router. Here you may
change the setting for VPI, VCI and QoS, etc.
Configure the parameters in this page as described below.
VPI: The virtual path identifier of the ATM PVC.
VCI: The virtual channel identifier of the ATM PVC.
QoS: The QoS category of the PVC. You can choose UBR, CBR, rt-VBR, or nrt-
VBR.
PCR: Peak cell rate (PCR) is the maximum rate at which cells can be transmitted
along a connection in the ATM network. Its value ranges from 1 to 65535.
CDVT: Cell delay variation tolerance (CDVT) is the amount of delay permitted
between ATM cells (in microseconds). Its value ranges from 0 to 4294967295.
SCR: Sustained cell rate (SCR) is the maximum rate that traffic can pass over a PVC
without the risk of cell loss. Its value ranges from 0 to 65535.
MBS: Maximum burst size (MBS) is the maximum number of cells that can be
transmitted at the PCR. Its value ranges from 0 to 65535.
36 D-Link DSL-526E User Manual