Message Counter Displays - AT&T TL74458 User Manual

Answering system operation
Message counter
BASE
MSG # MSG #
- -
1

Message counter displays

The message counter usually displays the total
number of answering system messages. See the
table below for other message counter displays.
Message counter displays
0
0 (flashing)
1-99
1-99 (flashing)
10-99
1-99 (counting)
99 (flashing)
F (flashing)
--
-- (flashing)
02, 04, 06, tS Displayed while setting the number of
1-8
61
No messages.
The clock needs to be set (page 51).
Total number of messages and memos,
or message number currently playing.
Total number of messages and memos.
The number flashes when there are new
(un-reviewed) messages.
After a power failure, the number in the
message counter will flash to indicate
the clock needs to be set.
Current remote access code while
setting (page 57).
Elapsed time while recording a memo
(page 60) or announcement up to 90
seconds (page 53).
A memo recording is more than 99
seconds.
Memory is full. Messages must be
deleted before new messages can be
recorded.
System is answering a call, being
accessed remotely, or the clock is being
set.
System is being setup, initialized or
messages are being deleted.
rings (page 56).
Displayed for two seconds while
telephone base speaker volume is being
adjusted.