Call Transfer Using Intercom - AT&T TL74458 User Manual

Telephone operation
NOTES:
1. Before the intercom call is
answered, you can cancel
the transfer and return to
the outside call by pressing
OFF/CLEAR,
PHONE/FLASH, or INT.
2. If the called handset does
not answer the intercom
call within 100 seconds,
or if the other handset is
in the directory or call log
mode, or out of range, the
calling handset will show
UNABLE TO CALL TRY
AGAIN on its screen and
will automatically return to
the outside call.
3. You can switch between
the intercom call and the
outside call by pressing INT
on the cordless handset.
The display will change
between INTERCOM and
OUTSIDE CALL to indicate
which party is active.
4. You can end the intercom
call and return to the
outside call by pressing
PHONE/
FLASH
calling handset.

Call transfer using intercom

Using a cordless handset:
Use the intercom feature to transfer an outside
call to the telephone base or a cordless handset
in the system.
1. During a conversation with an outside call,
2. Enter a handset number or enter 0 if you want
3. On the ringing handset, press
4. Press
on the
press INT TRANSFER TO: will be displayed on
.
the screen.
to transfer the call to the telephone base.
The screen will show CALLING HANDSET X
or CALLING BASE. The called handset or the
telephone base will ring, and its screen will
show HANDSET X IS CALLING.
INT, SPEAKER, or any dial pad key (0-9, * or
#) to answer the intercom call. You can now
talk without the outside caller hearing the
conversation.
-OR-
On the telephone base, press HANDSET
LOCATOR/INTERCOM,
pad key (0-9, * or #) to answer the intercom
call. You can now talk without the outside
caller hearing the conversation.
OFF
/CLEAR
or place the corded handset back to the
telephone base to complete the transfer.
The calling handset's screen will show CALL
TRANSFERED and the called handset will
automatically be connected to the outside
call.
23
PHONE
SPEAKER, or any dial
on the calling handset
,
/FLASH