Telephone operation
**PAGING**
Basic operation
Handset locator
The handset locator feature is useful if you misplace
a handset.
To start the paging tone:
HANDSET LOCATOR/INTERCOM on the
• Press
telephone base. This starts the paging tone at
the handset(s) for 60 seconds to help you locate
the handset(s).
NOTE: When paging, if you press
MUTE/
REMOVE
will be silent but the handset locator feature will not
be cancelled.
To stop the paging tone:
• Press PHONE
pad key (0-9, *, or #) on the handset(s).
–OR–
HANDSET LOCATOR/INTERCOM on the
• Press
telephone base.
NOTE: The handset ringer volume also determines the
level of the paging tone. If the handset ringer volume
level is set to off, that handset will be silent for all calls
and paging (page 26).
17
on a handset, the ringer of the handset
SPEAKER
/FLASH,
OFF/
or
CLEAR
or any dial
,