Table of Contents
Advertisement
3
BIOS Setup
CPU Configuration
This section is used to configure the CPU. It will also display the detected CPU
information.
CPU Configuration
Genuine Intel (R) CPU 0 @ 3.10GHz
Processor Stepping
Microcode Revision
Max Processor Speed
Min Processor Speed
Processor Speed
Processor Cores
Intel HT Technology
EMT64
Hyper-threading
Limit CPUID Maximum
Intel Virtualization Technology
Power Technology
Hyper-threading
Enable this field for Windows XP and Linux which are optimized for Hyper-
Threading technology. Select disabled for other OSes not optimized for Hyper-
Threading technology. When disabled, only one thread per enabled core is
enabled.
Limit CPUID Maximum
The CPUID instruction of some newer CPUs will return a value greater than
3. The default is Disabled because this problem does not exist in the Win-
dows series operating systems. If you are using an operating system other
than Windows, this problem may occur. To avoid this problem, enable this
field to limit the return value to 3 or less than 3.
Intel Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware
capabilities provided by Vanderpool Technology.
Power Technology
Enables the power management features.
60
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Advanced
206a5
7
3100 MHz
1600 MHz
3100 MHz
4
Supported
Supported
[Enabled]
[Disabled]
[Disabled]
[Energy Efficient]
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Enabled for Windows XP
and Linux (OS optimized
for Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for
Hyper-Threading
Technology). When
Disabled only one thread
per enabled core is
enabled.
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
Advertisement
Table of Contents
