DFI-ITOX SB100-NRM User Manual
  1. Manuals
  2. Brands
  3. DFI-ITOX Manuals
  4. Motherboard
  5. SB100-NRM
  6. User manual

DFI-ITOX SB100-NRM User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SB100-NRM
System Board
User's Manual
A16930145

Advertisement

Table of Contents
loading

Related Manuals for DFI-ITOX SB100-NRM

Summary of Contents for DFI-ITOX SB100-NRM

  • Page 1 SB100-NRM System Board User’s Manual A16930145...

  • Page 2: Copyright

    Copyright This publication contains information that is protected by copyright. No part of it may be reproduced in any form or by any means or used to make any transfor- mation/adaptation without the prior written permission from the copyright hold- ers.

  • Page 3: Fcc And Doc Statement On Class B

    FCC and DOC Statement on Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation.

  • Page 4: Table Of Contents

    Introduction Table of Contents Copyright ������������������������������������������������������������������������������������������� 2 Trademarks ���������������������������������������������������������������������������������������� 2 FCC and DOC Statement on Class B ���������������������������������������������� 3 About this Manual ����������������������������������������������������������������������������� 6 Warranty ������������������������������������������������������������������������������������������ 6 Static Electricity Precautions ������������������������������������������������������������� 7 Safety Measures ��������������������������������������������������������������������������������� 7 About the Package ���������������������������������������������������������������������������� 8 Before Using the System Board ��������������������������������������������������������...
  • Page 5 Introduction I/O Connectors ................42 S/PDIF Connector ..............42 Digital I/O Connectors .............. 43 SATA (Serial ATA) Connectors ............ 44 Cooling Fan Connectors ............. 45 Chassis Instrusion Connector ............ 46 Power Connectors ..............47 Standby Power LED ..............48 Front Panel Connectors ............. 49 Expansion Slots ...............

  • Page 6: About This Manual

    Introduction About this Manual An electronic file of this manual is included in the CD. To view the user’s manual in the CD, insert the CD into a CD-ROM drive. The autorun screen (Main Board Utility CD) will appear. Click “User’s Manual” on the main menu. Warranty 1.

  • Page 7: Static Electricity Precautions

    Introduction Static Electricity Precautions It is quite easy to inadvertently damage your PC, system board, components or devices even before installing them in your system unit. Static electrical dis- charge can damage computer components without causing any signs of physical damage.

  • Page 8: About The Package

    Introduction About the Package The system board package contains the following items. If any of these items are missing or damaged, please contact your dealer or sales representative for as- sistance. One system board  One PS/2 Keyboard/Mouse cable (optional) ...

  • Page 9: Chapter 1 - Introduction

    Introduction Chapter 1 - Introduction Specifications Processor • LGA 1155 socket for: - Intel Core i7-2600 (3.4GHz, 95W) ® - Intel Core i5-2400 (3.1GHz, 95W) ® - Intel Core i3-2120 (3.3GHz, 65W) ® - Intel Pentium G850 ® ® • New microarchitecture on 32nm process technology •...
  • Page 10 Introduction Intel Active • Supports iAMT7.0 Management • Out-of-band system access Technology • Remote troubleshooting and recovery (AMT) • Hardware-based agent presence checking • Proactive alerting • Remote hardware and software asset tracking TPM (optional) • TPM - Trusted Platform Module •...

  • Page 11: Features

    Introduction Features Watchdog Timer The Watchdog Timer function allows your application to regularly “clear” the sys- tem at the set time interval. If the system hangs or fails to function, it will reset at the set time interval so that your system will continue to operate. DDR3 DDR3 delivers increased system bandwidth and improved performance.
  • Page 12 Introduction Serial ATA Serial ATA is a storage interface that is compliant with SATA 1.0a specifica- tion. SATA 3.0 supports speed up to 6Gb/s while SATA 2.0 supports speed up to 3Gb/s. This improves hard drive performance faster than the standard parallel ATA whose data transfer rate is 100MB/s.
  • Page 13 Introduction RTC Timer The RTC installed on the system board allows your system to automatically pow- er-on on the set date and time. ACPI STR The system board is designed to meet the ACPI (Advanced Configuration and Power Interface) specification. ACPI has energy saving features that enables PCs to implement Power Management and Plug-and-Play with operating systems that support OS Direct Power Management.

  • Page 14: Chapter 2 - Hardware Installation

    Hardware Installation Chapter 2 - Hardware Installation System Board Layout COM1(JP3), COM2(JP5): 6Gb/s 3Gb/s RS232/Power select System fan COM1(JP1), COM2(JP6): RS232/422/485 select PS/2 power select (J Mouse ATX power DIO power COM3 COM4 Battery Fintek F81217U Intel Power-on select ( Standby Front Power LED...

  • Page 15: System Memory

    Hardware Installation Important: Electrostatic discharge (ESD) can damage your system board, processor, disk drives, add-in boards, and other components. Perform the upgrade instruction procedures described at an ESD workstation only. If such a station is not available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the system chassis.
  • Page 16 Hardware Installation The system board supports the following memory interface. Single Channel (SC) Data will be accessed in chunks of 64 bits (8B) from the memory channels. Dual Channel (DC) Data will be accessed in chunks of 128 bits from the memory channels. Dual channel provides better system performance because it doubles the data transfer rate.

  • Page 17: Installing The Dim Module

    Hardware Installation Installing the DIM Module Note: The system board used in the following illustrations may not resemble the actual board. These illustrations are for reference only. 1. Make sure the PC and all other peripheral devices connected to it has been powered down.

  • Page 18: Hardware Installation

    Hardware Installation 6. Grasping the module by its edges, position the module above the socket with the “notch” in the module aligned with the “key” on the socket. The keying mechanism ensures the module can be plugged into the socket in only one way.

  • Page 19: Cpu

    Hardware Installation The system board is equipped with a surface mount LGA 1155 socket. This sock- et is exclusively designed for installing a LGA 1155 packaged Intel CPU. Important: 1. Before you proceed, make sure (1) the LGA 1155 socket comes with a protective cap, (2) the cap is not damaged and (3) the socket’s contact pins are not bent.

  • Page 20: Installing The Cpu

    Hardware Installation Installing the CPU 1. Make sure the PC and all other peripheral devices connected to it has been powered down. 2. Disconnect all power cords and cables. 3. Locate the LGA 1155 CPU s o c k e t o n t h e s y s t e m board.
  • Page 21 Hardware Installation 5. Lifting the load lever will at Load lever the same time lift the load plate. Lift the load lever up to the angle shown on the Load photo. plate 6. Remove the protective cap from the CPU socket. The cap is used to protect the CPU socket against dust and harmful particles.
  • Page 22 Hardware Installation 7. Insert the CPU into the socket. The gold triangu- lar mark on the CPU must align with the corner of the CPU socket shown on the photo. Gold triangular mark The CPU’s notch will at Alignment key the same time fit into the socket’s alignment key.
  • Page 23 Hardware Installation 8. Close the load plate then push the load lever down. While closing the load plate, make sure the front Retention edge of the load plate knob slides under the retention knob. 9. Hook the load lever under Load lever the retention tab.

  • Page 24: Installing The Fan And Heat Sink

    Hardware Installation Installing the Fan and Heat Sink The CPU must be kept cool by using a CPU fan with heat sink. Without sufficient air circulation across the CPU and heat sink, the CPU will overheat damaging both the CPU and system board. Note: A boxed Intel processor already includes the CPU fan and heat sink as-...
  • Page 25 Hardware Installation 4. Rotate each push-pin ac- cording to the direction of the arrow shown on top of the pin. Push down two pushpins that are diagonally across the heat sink. Perform the same procedure for the other two push-pins. Heat sink “Unlocked”...

  • Page 26: Jumper Settings

    Hardware Installation Jumper Settings Clear CMOS Data 1-2 On: Normal 2-3 On: Intel (default) Clear CMOS Data Intel If you encounter the following, a) CMOS data becomes corrupted. b) You forgot the supervisor or user password. you can reconfigure the system with the default values stored in the ROM BIOS. To load the default values stored in the ROM BIOS, please follow the steps below. 1.

  • Page 27: Ps/2 Power Select

    Hardware Installation PS/2 Power Select 1-2 On: +5V 2-3 On: (default) +5V_standby Intel Intel JP2 is used to select the power of the PS/2 keyboard and PS/2 mouse ports. Se- lecting +5V_standby will allow you to use the PS/2 keyboard or PS/2 mouse to wake up the system.

  • Page 28: Usb Power Select

    Hardware Installation USB Power Select Intel Intel USB 2-5 (JP7) USB 0-1/8-9 (JP4) 1-2 On: +5V 2-3 On: (default) +5V_standby These jumpers are used to select the power of the USB ports. Selecting +5V_standby will allow you to use a USB device to wake up the system. Important: If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the +5V_standby power source of your power supply must sup-...

  • Page 29: Power-On Select

    Hardware Installation Power-on Select 1-2 On: Power-on via power button Intel (default) Intel 2-3 On: Power-on via AC power; or Power-on via WOL after G3 To power-on via WOL after G3: 1. Set JP8 pins 2 and 3 to On. 2. Set the “After G3” field to Power Off/WOL.

  • Page 30: Com1/Com2 Rs232/Rs422/Rs485 Select

    Hardware Installation COM1/COM2 RS232/RS422/RS485 Select Intel COM 2 Intel COM 1 JP1 (for COM1) and JP6 (for COM2) are used to configure the COM ports to RS232, RS422 (Full Duplex) or RS485. The pin function of the COM ports will vary according to the jumper’s setting. JP1/JP6 1-2 On: RS232 3-4 On: RS422...

  • Page 31: Com1/Com2 Rs232/Power Select

    Hardware Installation COM1/COM2 RS232/Power Select Intel Intel 1-3 (RI), 2-4 (DCD) On: RS232 (default) 3-5 (+5V), 4-6 (+12V) On: RS232 with power...

  • Page 32: Rear Panel I/O Ports

    Hardware Installation Rear Panel I/O Ports PS/2 COM 2 Mouse Mic-in Line-in Line-out PS/2 K/B COM 1 DVI-I USB 0-1 USB 8-9 (DVI-D signal only) The rear panel I/O ports consist of the following: • PS/2 mouse port • PS/2 keyboard port • 2 COM ports • VGA port • DVI-I port (DVI-D signal only) • 2 LAN ports • 4 USB ports •...

  • Page 33: Ps/2 Mouse And Ps/2 Keyboard Ports

    Hardware Installation PS/2 Mouse and PS/2 Keyboard Ports PS/2 Mouse Intel PS/2 KB Intel These ports are used to connect a PS/2 mouse and a PS/2 keyboard. The PS/2 mouse port uses IRQ12. Wake-On-PS/2 Keyboard/Mouse The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 key- board or PS/2 mouse to power-on the system. To use this function: •...

  • Page 34: Com (Serial) Ports

    Hardware Installation COM (Serial) Ports COM 3 COM 4 COM 2 Intel Intel COM 1 COM 1 and COM 2: RS232/422/485 COM 3 and COM 4: RS232 COM 3 and COM 4 are fixed at RS232. The pin function of COM 1 and COM 2 ports will vary according to JP1/JP6’s set- ting. Refer to “COM1/COM2 RS232/RS422/RS485 Select” in this chapter for more information.

  • Page 35: Vga Port

    Hardware Installation VGA Port Intel Intel The VGA port is used for connecting a VGA monitor. Connect the monitor’s 15-pin D-shell cable connector to the VGA port. After you plug the monitor’s cable con- nector into the VGA port, gently tighten the cable screws to hold the connector in place. BIOS Setting Configure VGA in the Chipset menu (“North Bridge Configuration” submenu) of the BIOS. Refer to chapter 3 for more information.

  • Page 36: Dvi-I Port

    Hardware Installation DVI-I Port Intel Intel DVI-I (DVI-D signal only) The DVI-I port is used to connect an LCD monitor. This port supports DVI-D sig- nal only. Connect the display device’s cable connector to the DVI-I port. After you plug the cable connector into the port, gently tighten the cable screws to hold the connec- tor in place. BIOS Setting Configure the display device in the Chipset menu (“North Bridge Configuration” submenu) of the BIOS. Refer to chapter 3 for more information.

  • Page 37: Rj45 Lan Ports

    Hardware Installation RJ45 LAN Ports Intel Intel LAN 1 LAN 2 Features • Intel 82579LM with iAMT7.0 Gigabit Ethernet Phy • Intel 82574L PCI Express Gigabit Ethernet controller The LAN ports allow the system board to connect to a local area network by means of a network hub. BIOS Setting Configure the onboard LAN in the Chipset menu (“South Bridge Configuration” submenu) of the BIOS. Refer to chapter 3 for more information.

  • Page 38: Usb Ports

    Hardware Installation USB Ports USB 2-3 USB 4-5 Intel Intel USB 1 USB 0 USB 9 USB 8 USB allows data exchange between your computer and a wide range of simulta- neously accessible external Plug and Play peripherals. The system board is equipped with two onboard USB 2.0/1.1 ports. The two 10-pin connectors allow you to connect 4 additional USB 2.0/1.1 ports. The ad- ditional USB ports may be mounted on a card-edge bracket. Install the card-edge bracket to an available slot at the rear of the system chassis and then insert the USB port cables to a connector.
  • Page 39 Hardware Installation Wake-On-USB Keyboard/Mouse The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse to wake up a system from the S3 (STR - Suspend To RAM) state. To use this function: • Jumper Setting JP4 and/or JP7 must be set to “2-3 On: +5V_standby”. Refer to “USB Power Select” in this chapter for more information. Important: If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the +5V_standby power source of your power supply must sup-...

  • Page 40: Audio

    Hardware Installation Audio Rear audio Intel Intel Mic-in Line-in Line-out Front audio Rear Audio The system board is equipped with 3 audio jacks. A jack is a one-hole connecting interface for inserting a plug. • Mic-in Jack (Pink) This jack is used to connect an external microphone. • Line-in Jack (Light Blue) This jack is used to connect any audio devices such as Hi-fi set, CD player, tape player, AM/FM radio tuner, synthesizer, etc. • Line-out Jack (Lime) This jack is used to connect a headphone or external speakers. Front Audio The front audio connector allows you to connect to the second line-out and mic- in jacks that are at the front panel of your system.
  • Page 41 Hardware Installation BIOS Setting Configure the onboard audio in the Chipset menu (“South Bridge” submenu) of the BIOS. Refer to chapter 3 for more information. Driver Installation Install the audio driver. Refer to chapter 4 for more information.

  • Page 42: I/O Connectors

    Hardware Installation I/O Connectors S/PDIF Connector Intel Intel SPDIF out Ground SPDIF in The S/PDIF connector is used to connect an external S/PDIF port. Your S/PDIF port may be mounted on a card-edge bracket. Install the card-edge bracket to an available slot at the rear of the system chassis then connect the audio cable to the S/PDIF connector. Make sure pin 1 of the audio cable is aligned with pin 1 of the S/PDIF connector.

  • Page 43: Digital I/O Connectors

    Hardware Installation Digital I/O Connectors DIO connector Intel Intel DIO power connector The Digital I/O connector provides powering-on function to external devices that are connected to these connectors. Pin Assignment DIO7 DIO6 DIO5 DIO4 DIO3 DIO2 DIO1 DIO0...

  • Page 44: Sata (Serial Ata) Connectors

    Hardware Installation SATA (Serial ATA) Connectors SATA 3.0 6Gb/s SATA 2.0 3Gb/s SATA 4 SATA 0 SATA 1 SATA 5 SATA 0 SATA 1 SATA 4 SATA 5 Intel Intel Features • SATA 0 and SATA 1 support data transfer rate up to 6Gb/s • SATA 4 and SATA 5 support data transfer rate up to 3Gb/s • Integrated Advanced Host Controller Interface (AHCI) controller • Supports RAID 0, RAID 1, RAID 5 and RAID 10 The Serial ATA connectors are used to connect Serial ATA devices. Connect one end of the Serial ATA cable to a SATA connector and the other end to your Serial ATA device.

  • Page 45: Cooling Fan Connectors

    Hardware Installation Cooling Fan Connectors Sense Ground Intel Power Intel System fan Speed Control Sense Power Ground CPU fan The fan connectors are used to connect cooling fans. The cooling fans will provide adequate airflow throughout the chassis to prevent overheating the CPU and sys- tem board components. BIOS Setting The Advanced menu (“Hardware Health Configuration” submenu) of the BIOS will display the current speed of the cooling fans. Refer to chapter 3 for more infor- mation.

  • Page 46: Chassis Intrusion Connector

    Hardware Installation Chassis Intrusion Connector Ground Intel Chassis Intel signal The board supports the chassis intrusion detection function. Connect the chas- sis intrusion sensor cable from the chassis to this connector. When the system’s power is on and a chassis intrusion occurred, an alarm will sound. When the system’s power is off and a chassis intrusion occurred, the alarm will sound only when the system restarts.

  • Page 47: Power Connectors

    Hardware Installation Power Connectors Intel Intel +12V +12V Ground Ground ATX power Use a power supply that complies with the ATX12V Power Supply Design Guide Version 1.1. An ATX12V power supply unit has a standard 24-pin ATX main power connector that must be inserted into the 24-pin connector. The 4-pin +12V power connector enables the delivery of more +12VDC current to the processor’s Voltage Regulator Module (VRM).

  • Page 48: Standby Power Led

    Hardware Installation Standby Power LED Standby Power LED Intel Intel This LED will light red when the system is in the standby mode. It indicates that there is power on the system board. Power-off the PC and then unplug the power cord prior to installing any devices. Failure to do so will cause severe damage to the motherboard and components.

  • Page 49: Front Panel Connectors

    Hardware Installation Front Panel Connectors PWR-LED HDD-LED Intel Intel PWR-BTN RESET-SW HDD-LED - HDD LED This LED will light when the hard drive is being accessed. RESET SW - Reset Switch This switch allows you to reboot without having to power off the system. PWR-BTN - Power Switch This switch is used to power on or off the system. PWR-LED - Power/Standby LED When the system’s power is on, this LED will light. When the system is in the S1 (POS - Power On Suspend) state, it will blink every second. When the system is in the S3 (STR - Suspend To RAM) state, it will blink every 4 seconds.

  • Page 50: Expansion Slots

    Hardware Installation Expansion Slots Intel Intel PCI Express x16 PCI Express x16 Slot Install PCI Express x16 graphics card, that comply to the PCI Express specifica- tions, into the PCI Express x16 slot. To install a graphics card into the x16 slot, align the graphics card above the slot then press it down firmly until it is com- pletely seated in the slot. The retaining clip of the slot will automatically hold the graphics card in place.

  • Page 51: Battery

    Hardware Installation Battery Battery Intel Intel The lithium ion battery powers the real-time clock and CMOS memory. It is an auxiliary source of power when the main power is shut off. Safety Measures • Danger of explosion if battery incorrectly replaced. • Replace only with the same or equivalent type recommend by the manufac- turer. • Dispose of used batteries according to local ordinance.

  • Page 52: Chapter 3 - Bios Setup

    BIOS Setup Chapter 3 - BIOS Setup Overview The BIOS is a program that takes care of the basic level of communication be- tween the CPU and peripherals. It contains codes for various advanced features found in this system board. The BIOS allows you to configure the system and save the configuration in a battery-backed CMOS so that the data retains even when the power is off.
  • Page 53 BIOS Setup Legends Keys Function Right and Left arrows Moves the highlight left or right to select a menu. Up and Down arrows Moves the highlight up or down between submenus or fields. <Esc> Exits to the BIOS Setup Utility. + (plus key) Scrolls forward through the values or options of the highlighted field.

  • Page 54: Ami Bios Setup Utility

    BIOS Setup AMI BIOS Setup Utility Main The Main menu is the first screen that you will see when you enter the BIOS Setup Utility. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save &...

  • Page 55: Advanced

    BIOS Setup Advanced The Advanced menu allows you to configure your system for basic operation. Some entries are defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features ac- cording to your preference.

  • Page 56: Bios Setup

    BIOS Setup ACPI Power Management Configuration This section is used to configure the ACPI Power Management. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced ACPI Power Management Configuration Select the highest ACPI sleep state the system will [S3 (Suspend to RAM) ] ACPI Sleep State enter, when the SUSPEND...

  • Page 57: Tpm Support

    BIOS Setup Trusted Computing (optional) This section configures settings relevant to Trusted Computing innovations. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced TPM Configuration Enables or Disables TPM support. O.S. will TPM Support [Disabled] not show TPM. Reset of platform is required.

  • Page 58: Pc Health Status

    BIOS Setup PC Health Status This section displays the SIO hardware health monitor. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced Smart Fan Function Smart Fan Function  [Disabled] Case Open System Hardware Monitor CPU Temperature : +56 C System Temperature : +34 C CPU FAN Speed...
  • Page 59 BIOS Setup Boundary 1 to Boundary 4 The range is from 0-127. Speed Count 1 to Speed Count 5 The range is from 1-100. Case Open Set this field to Enabled to allow the system to alert you of a chassis intru- sion event.

  • Page 60: Cpu Configuration

    BIOS Setup CPU Configuration This section is used to configure the CPU. It will also display the detected CPU information. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced CPU Configuration Enabled for Windows XP and Linux (OS optimized Genuine Intel (R) CPU 0 @ 3.10GHz for Hyper-Threading Processor Stepping...

  • Page 61: Turbo Mode

    BIOS Setup If Custom is selected in the Power Technology field, it will display the following information: Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced CPU Configuration Enable the power manage- ment features. Genuine Intel (R) CPU 0 @ 3.10GHz Processor Stepping 206a5 Microcode Revision...

  • Page 62: Sata Configuration

    BIOS Setup SATA Configuration This section is used to configure SATA functions. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced SATA Configuration (1) IDE Mode. (2) AHCI Mode. SATA Mode [IDE Mode] (3) RAID Mode. Serial-ATA Controller 0 [Compatible] Serial-ATA Controller 1 [Enhanced]...
  • Page 63 BIOS Setup If AHCI or RAID is selected in the SATA Mode field, it will display the following information: Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced SATA Configuration (1) IDE Mode. (2) AHCI Mode. (3) RAID Mode. SATA Mode [RAID Mode] SATA Port 0...

  • Page 64: Intel Igd Swsci Opregion

    BIOS Setup Intel IGD SWSCI OpRegion This section is used to configure the Intel graphics display. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced Select DVMT Mode used Intel IGD SWSCI OpRegion Configuration by Internal Graphics Device DVMT Mode Select [DVMT Mode] DVMT/FIXED Memory...
  • Page 65 BIOS Setup Intel TXT (LT) Configuration This section is used to configure the Intel Trusted Execution technology. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced Intel Trusted Execution Technology Configuration Intel TXT support only can be enabled/disabled if SMX is enabled.

  • Page 66: Usb Configuration

    BIOS Setup USB Configuration This section is used to configure USB. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced Enables Legacy USB USB Configuration support. AUTO option disables legacy support if USB Devices: no USB devices are 2 Hubs connected.
  • Page 67 BIOS Setup F71879 Super IO Configuration This section is used to configure the I/O functions supported by the onboard Super I/O chip. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced F71879 Super IO Configuration Restore AC Power Loss help.

  • Page 68: Second Super Io Configuration

    BIOS Setup Second Super IO Configuration This section is used to configure the serial port functions. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced Second Super IO Configuration Set Parameters of Serial Port 1 (COMC) Super IO Chip Fintek-F81217 Serial Port 1 Configuration ...

  • Page 69: Amt Configuration

    BIOS Setup AMT Configuration This section is used to configure the AMT function. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced [Enabled] AMT Help Unconfigure AMT/ME [Disabled] Select Screen → ←: Select Item ↑↓: Enter: Select +/ -: Change Opt.

  • Page 70: Chipset

    BIOS Setup Chipset Configures relevant chipset functions. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit North Bridge Parameters North Bridge  South Bridge  ME Subsystem  Select Screen ← →: Select Item ↑↓: Enter: Select...

  • Page 71: North Bridge

    BIOS Setup North Bridge Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Chipset Memory Information VT-d Enable/Disable 1024 MB (DDR3 1333) Total Memory Memory Slot0 0 MB (DDR3 1333) Memory Slot1 1024 MB (DDR3 1333) VT-d [Disabled] [PEG/IGD] Initiate Graphic Adapter IGD Memory [64M]...

  • Page 72: South Bridge

    BIOS Setup South Bridge Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Chipset Enable/Disable GbE SB Chipset Configuration control PME in S5. GbE Controller [Enabled] Wake on Lan from S5 [Enabled] After G3 [Power On] Audio Configuration Azalia HD Audio [Enabled] PCI Express Ports Configuration ...

  • Page 73: Pci Express Ports Configuration

    BIOS Setup PCI Express Ports Configuration Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Chipset PCI Express Ports Configuration Enable/Disable the PCI Express Ports in the [Auto] Chipset. On Board LAN2 Select Screen → ←: Select Item ↑↓: Enter: Select +/ -: Change Opt.
  • Page 74 BIOS Setup USB Port 0 to USB Port 9 Enables or disables the selected USB port.
  • Page 75 BIOS Setup ME Subsystem Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Chipset ME Subsystem Help Intel ME Subsystem Configuration ME Version 7.0.2.1164 ME Subsystem [Enabled] Execute MEBx [Enabled] Select Screen → ←: Select Item ↑↓: Enter: Select +/ -: Change Opt.

  • Page 76: Boot

    BIOS Setup Boot Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Number of seconds to Boot Configuration wait for setup activation Setup Prompt Timeout key. Bootup NumLock State [On] 65535(0xFFFF) means indefinite waiting.
  • Page 77 BIOS Setup Boot Option #1 Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Boot Sets the system boot order. Boot Option #1 [TOSHIBA TransMemor...] Select Screen ← →: Select Item ↑↓: Enter: Select +/ -: Change Opt. General Help Previous Values Optimized Defaults Save &...

  • Page 78: Security

    BIOS Setup Security Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Password Description Set Setup Administrator Password If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup.

  • Page 79: Hdd Security Configuration

    BIOS Setup HDD Security Configuration BIOS SETUP UTILITY Security HDD Password Description: Allows access to set, modify and clear hard disk user and master passwords. User Password need to be installed for enabling security. Master password can be modified only when successfully unlocked with Master Password in POST.

  • Page 80: Save & Exit

    BIOS Setup Save & Exit Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Reset the system after Save Changes and Reset saving the changes. Discard Changes and Reset Save Options Restore Defaults Save as User Defaults Restore User Defaults...

  • Page 81: Updating The Bios

    BIOS Setup Updating the BIOS To update the BIOS, you will need the new BIOS file and a flash utility, AFUDOS. EXE. Please contact technical support or your sales representative for the files. To execute the utility, type: A:> AFUDOS BIOS_File_Name /b /p /n then press <Enter>.

  • Page 82: Chapter 4 - Supported Software

    Supported Software Chapter 4 - Supported Software The CD that came with the system board contains drivers, utilities and software applications required to enhance the performance of the system board. Insert the CD into a CD-ROM drive. The autorun screen (Mainboard Utility CD) will appear.

  • Page 83: Intel Chipset Software Installation Utility

    Supported Software Intel Chipset Software Installation Utility The Intel Chipset Software Installation Utility is used for updating Windows ® files so that the Intel chipset can be recognized and configured properly in the system. To install the utility, click “Intel Chipset Software Installation Utility” on the main menu.
  • Page 84 Supported Software 3. Go through the readme document for system re- quirements and installation tips then click Next. 4. Setup is now installing the driver. Click Next to con- tinue. 5. Click “Yes, I want to restart this computer now” then click Finish.
  • Page 85 Supported Software Microsoft DirectX 9.0C (for Windows XP only) To install the utility, click “Microsoft DirectX 9.0C” on the main menu. 1. C l i c k “ I a c c e p t t h e agreement” then click Next. 2.
  • Page 86 Supported Software Microsoft .NET Framework 3.5 (for Windows XP only) Note: Before installing Microsoft .NET Framework 3.5, make sure you have up- dated your Windows XP operating system to Service Pack 3. To install the driver, click “Microsoft .NET Framework 3.5” on the main menu. 1.
  • Page 87 Supported Software 3. Click Exit.
  • Page 88 Supported Software Intel Graphics Drivers (for Windows Vista) To install the driver, click “Intel Graphics Drivers” on the main menu. 1. Setup is now ready to in- stall the graphics driver. Click Next. By default, the “Automatically run WinSAT and enable the Windows Aero desktop theme”...
  • Page 89 Supported Software 2. Read the license agreement then click Yes. 3. Go through the readme document for system re- quirements and installation tips then click Next. 4. Setup is currently installing the driver. After installation has completed, click Next.
  • Page 90 Supported Software 5. Click “Yes, I want to restart this computer now” then click Finish. Restarting the system will allow the new software in- stallation to take effect.
  • Page 91 Supported Software Intel Graphics Drivers (for Windows XP) To install the driver, click “Intel Graphics Drivers” on the main menu. 1. Setup is ready to install the graphics driver. Click Next. 2. Read the license agreement then click Yes. 3. Go through the readme document for more installa- tion tips then click Next.
  • Page 92 Supported Software 4. Setup is currently installing the driver. After installation has completed, click Next. 5. Click “Yes, I want to restart this computer now.” then click Finish. Restarting the system will allow the new software in- stalllation to take effect.

  • Page 93: Audio Drivers

    Supported Software Audio Drivers To install the driver, click “Audio Drivers” on the main menu. 1. Setup is now ready to in- stall the audio driver. Click Next. 2. Follow the remainder of the steps on the screen; click- ing “Next” each time you finish a step.

  • Page 94: Lan Drivers

    Supported Software LAN Drivers To install the driver, click “LAN Drivers” on the main menu. 1. Setup is ready to install the driver. Click Next. 2. Click “I accept the terms in the license agreement” then click “Next”. 3. Select the program featuers you want installed then click Next.
  • Page 95 Supported Software 4. Click Install to begin the installation. 5. After completing installa- tion, click Finish.

  • Page 96: Intel Management Engine Interface

    Supported Software Intel Management Engine Interface To install the driver, click “Intel Management Engine Interface” on the main menu. 1. Setup is ready to install the driver. Click Next. 2. Read the license agreement then click Yes. 3. Go through the readme document for more installa- tion tips then click Next.
  • Page 97 Supported Software 4. Setup is currently installing the driver. After installation has completed, click Next. 5. After completing installa- tion, click Finish.

  • Page 98: Myguard Hardware Monitor

    Supported Software MyGuard Hardware Monitor 1. Locate for the MyGuard folder in the provided disc. 2. In the MyGuard folder, right-click on the “setup” file. 3. Select Run As Administra- tor. 4. Double-click Setup. Important: Perform steps 1-3 only when using Windows 7 or Windows Vista.
  • Page 99 Supported Software 7. Setup is currently installing the utility. 8. After completing instal- lation, click Finish to exit setup.

  • Page 100: F6 Floppy Configuration Utility

    Supported Software F6 Floppy Configuration Utility This is used to create a floppy driver diskette needed when you install Windows ® XP using the F6 installation method. This will allow you to install the operating system onto a hard drive when in AHCI mode. 1.

  • Page 101: Adobe Acrobat Reader

    Supported Software Adobe Acrobat Reader 9.3 To install the reader, click “Adobe Acrobat Reader 9.3” on the main menu. 1. Click Next to install or click Change Destination Folder to select another folder. 2. Click Install to begin instal- lation. 3.
  • Page 102 Supported Software Infineon TPM Driver and Tool (optional) To install the driver, click “Infineon TPM driver and tool (option)” on the main menu. 1. TPM requires installing the Microsoft Visual C++ pack- age prior to installing the driver. Click Install. 2.
  • Page 103 Supported Software 4. Click “I accept the terms in the license agreement” and then click “Next”. 5. Enter the necessary infor- mation and then click Next. 6. Select a setup type and then click Next.
  • Page 104 Supported Software 7. Click Install. 8. The setup program is cur- rently installing the driver. 9. Click Finish.
  • Page 105 Supported Software Click Yes to restart the system. Restarting the system will allow the new software installation to take effect.

  • Page 106: Chapter 5 - Raid

    RAID Chapter 5 - RAID The system board allows configuring RAID on Serial ATA drives. It supports RAID 0, RAID 1, RAID 5 and RAID 10. RAID Levels RAID 0 (Striped Disk Array without Fault Tolerance) RAID 0 uses two new identical hard disk drives to read and write data in parallel, interleaved stacks.

  • Page 107: Settings

    RAID Settings To enable the RAID function, the following settings are required. 1. Connect the Serial ATA drives. 2. Configure Serial ATA in the AMI BIOS. 3. Configure RAID in the RAID BIOS. 4. Install the RAID driver during OS installation. 5.
  • Page 108 RAID Step 4: Install the RAID Driver During OS Installation The RAID driver must be installed during the Windows XP or Windows 2000 in- ® ® stallation using the F6 installation method. This is required in order to install the operating system onto a hard drive or RAID volume when in RAID mode or onto a hard drive when in AHCI mode.
  • Page 109 RAID Step 5: Install the Intel Rapid Storage Drivers The Intel Rapid Storage Drivers can be installed from within Windows. It allows RAID volume management (create, delete, migrate) from within the operating system. It will also display useful SATA device and RAID volume information. The user interface, tray icon service and monitor service allow you to monitor the current status of the RAID volume and/or SATA drives.
  • Page 110 RAID 5. Read the license agree- ment then click Yes. 6. Go through the readme document to view system requirements and installa- tion information then click Next. 7. Setup is currently installing the driver. After installation has completed, click Next.
  • Page 111 RAID 8. Click “Yes, I want to restart my computer now” then click Finish.

  • Page 112: Chapter 6 - Intel Amt Settings

    Intel AMT Settings Chapter 6 - Intel AMT Settings Overview Intel Active Management Technology (Intel ® AMT) combines hardware and soft- ware solution to provide maximum system defense and protection to networked systems. The hardware and software information are stored in non-volatile memory. With its built-in manageability and latest security applications, Intel AMT provides the ®...

  • Page 113: Enable Intel ® Amt In The Ami Bios

    Intel AMT Settings Enable Intel AMT in the AMI BIOS ® 1. Power-on the system then press <Del> to enter the main menu of the AMI BIOS. 2. In the Advanced menu, select AMT Configuration. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Chipset Boot...
  • Page 114 Intel AMT Settings 4. In the Chipset menu, select ME Subsystem. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit North Bridge Parameters North Bridge  South Bridge  ME Subsystem ...
  • Page 115 Intel AMT Settings 6. In the Save & Exit menu, select Save Changes and Reset then select OK. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Save Changes and Reset Reset the system after saving the changes.

  • Page 116: Extension (Mebx) Screen

    Intel AMT Settings Enable Intel AMT in the Intel Management ® ® Engine BIOS Extension (MEBX) Screen 1. When the system reboots, the following message will be displayed. Press <Ctrl-P> as soon as the message is displayed; as this message will be dis- played for only a few seconds.
  • Page 117 Intel AMT Settings 3. Enter a new password in the space provided under Intel(R) ME New Password then press Enter. The password must include: • 8-32 characters • Strong 7-bit ASCII characters excluding : , and ” characters • At least one digit character (0, 1, ...9) • At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. !, $, ;) • Both lower case and upper case characters Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation.
  • Page 118 Intel AMT Settings 4. You will be asked to verify the password. Enter the same new password in the space provided under Verify Password then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. MAIN MENU Intel(R) ME General Settings ...
  • Page 119 Intel AMT Settings 6. Select Change Intel(R) ME Password then press Enter. You will be prompted for a password. The default password is “admin”. Enter the default password in the space provided under Intel(R) ME New Password then press Enter. • 8-32 characters • Strong 7-bit ASCII characters excluding : , and ”...
  • Page 120 Intel AMT Settings 7. Select FW Update Settings then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) ME PLATFORM CONFIGURATION Change Intel(R) ME Passowrd FW Update Settings  Set PRTC Power Control ...
  • Page 121 Intel AMT Settings In the Intel(R) ME Platform Configuration menu, select Set PRTC then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) ME PLATFORM CONFIGURATION Change Intel(R) ME Passowrd FW Update Settings ...
  • Page 122 Intel AMT Settings In the Intel(R) ME Platform Configuration menu, select Power Control then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) ME PLATFORM CONFIGURATION Change Intel(R) ME Passowrd FW Update Settings ...
  • Page 123 Intel AMT Settings In the Intel(R) ME Power Control menu, select Idle Timeout then press Enter. Enter the timeout value. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) ME POWER CONTROL Intel(R) ME ON in Host Sleep States Idle Timeout Previous Menu Timeout Value (1-65535)
  • Page 124 Intel AMT Settings In the Intel(R) AMT Configuration menu, select Manageability Feature Selection then press Enter. Type Y then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) AMT CONFIGURATION Manageability Feature Selection SOL/IDER/KVM ...
  • Page 125 Intel AMT Settings In the Intel(R) AMT Configuration menu, select SOL/IDER/KVM then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) AMT CONFIGURATION Manageability Feature Selection SOL/IDER/KVM  User Consent  Password Policy Network Setup ...
  • Page 126 Intel AMT Settings In the SOL/IDER/KVM menu, select SOL then press Enter. Select Disabled then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. SOL/IDER/KVM Username and Password IDER Legacy Redirection Mode Previous Menu ] = Select [ESC] = Exit [ENTER] = Access ↑↓...
  • Page 127 Intel AMT Settings In the SOL/IDER/KVM menu, select Legacy Redirection Mode then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. SOL/IDER/KVM Username & Password IDER Legacy Redirection Mode Previous Menu ] = Select [ESC] = Exit [ENTER] = Access ↑↓...
  • Page 128 Intel AMT Settings In the SOL/IDER/KVM menu, select KVM then press Enter. Select Disa- bled then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. SOL/IDER/KVM Username and Password IDER Legacy Redirection Mode Previous Menu ] = Select [ESC] = Exit...
  • Page 129 Intel AMT Settings In the User Consent Configuration menu, select User Opt-in then press Enter. Select None then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. USER CONSENT CONFIGURATION User Opt-in Opt-in Configurable from Remote IT Previous Menu ] = Select [ESC] = Exit...
  • Page 130 Intel AMT Settings 27. Select Previous Menu until you return to the Intel(R) AMT Configuration menu. Select Password Policy then press Enter. You may choose to use a password only during setup and configuration or to use a password anytime the system is being accessed. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation.
  • Page 131 Intel AMT Settings In the Intel(R) AMT Configuration menu, select Network Setup then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) AMT CONFIGURATION Manageability Feature Selection SOL/IDER/KVM  User Consent ...
  • Page 132 Intel AMT Settings In the Intel(R) ME Network Name Settings menu, select Host Name then press Enter. Enter the computer’s host name then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) ME NETWORK NAME SETTINGS Host Name Domain Name...
  • Page 133 Intel AMT Settings 32. Select Shared/Dedicated FQDN then press Enter. Select Shared or Dedi- cated then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) ME NETWORK NAME SETTINGS Host Name Domain Name Shared/Dedicated FQDN Dynamic DNS Update...
  • Page 134 Intel AMT Settings 34. Select Previous Menu until you return to the Intel(R) ME Network Setup menu. Select TCP/IP Settings then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) ME NETWORK SETUP Intel(R) ME Network Name Settings  TCP/IP Settings ...
  • Page 135 Intel AMT Settings In the Wired LAN IPV4 Configuration menu, select DHCP Mode then press Enter. Select Disabled then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. WIRED LAN IPV4 CONFIGURATION DHCP Mode Previous Menu ] = Select [ESC] = Exit [ENTER] = Access ↑↓...
  • Page 136 Intel AMT Settings In the Wired LAN IPV6 Configuration menu, select IPV6 Feature Se- lection then press Enter. Select Disabled then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. WIRED LAN IPV6 CONFIGURATION IPV6 Feature Selection Previous Menu ] = Select [ESC] = Exit [ENTER] = Access...
  • Page 137 Intel AMT Settings In the Intel(R) AMT Configuration menu, select Unconfigure Network Access then press Enter. Type Y then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) AMT CONFIGURATION Manageability Feature Selection SOL/IDER/KVM ...
  • Page 138 Intel AMT Settings In the Intel(R) Automated Setup And Configuration menu, select Cur- rent Provisioning Mode then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) AUTOMATED SETUP AND CONFIGURATION Current Provisioning Mode Provisioning Record RCFG ...
  • Page 139 Intel AMT Settings In the Intel(R) Automated Setup And Configuration menu, select RCFG then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) AUTOMATED SETUP AND CONFIGURATION Current Provisioning Mode Provisioning Record RCFG ...
  • Page 140 Intel AMT Settings 46. Select Previous Menu until you return to the Intel(R) Automated Setup And Configuration menu. Select Provisioning Server IPV4/IPV6 then press Enter. Type server address then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) AUTOMATED SETUP AND CONFIGURATION Current Provisioning Mode Provisioning Record...
  • Page 141 Intel AMT Settings In the Intel(R) Automated Setup And Configuration menu, select TLS PSK then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) AUTOMATED SETUP AND CONFIGURATION Current Provisioning Mode Provisioning Record RCFG ...
  • Page 142 Intel AMT Settings In the Intel(R) Remote Configuration menu, select Delete PID and PPS ** then press Enter. Type Y then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) REMOTE CONFIGURATION Set PID and PPS ** Delete PID and PPS ** Previous Menu...
  • Page 143 Intel AMT Settings In the Intel(R) Remote Configuration menu, select Remote Configura- tion ** then press Enter. Select Disabled then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) REMOTE CONFIGURATION Remote Configuration ** PKI DNS Suffix Manage Hashes Previous Menu ] = Select [ESC] = Exit...
  • Page 144 Intel AMT Settings In the Intel(R) Remote Configuration menu, select Manage Hashes then press Enter. Intel(R) Management Engine BIOS Extension v7.0.0.0053/Intel(R) ME v7.0.4.1197 Copyright(C) 2003-09 Intel Corporation. All Rights Reserved. INTEL(R) REMOTE CONFIGURATION Remote Configuration ** PKI DNS Suffix Manage Hashes Previous Menu Hash Name Active Default Algorithm Type...

  • Page 145: Appendix A - Nlite And Ahci Installation Guide

    NLITE and AHCI Installation Guide Appendix A - NLITE and AHCI Installation Guide nLite nLite is an application program that allows you to customize your XP installation disc by integrating the RAID/AHCI drivers into the disc. By using nLite, the F6 function key usually required during installation is no longer needed.
  • Page 146 NLITE and AHCI Installation Guide 4. Insert the XP installation disc into an optical drive. 5. Launch nLite. The Welcome screen will appear. Click Next. 6. Click Next to temporarily save the Windows installa- tion files to the designated default folder. If you want to save them in another folder, click Browse, select the folder...
  • Page 147 NLITE and AHCI Installation Guide 7. Click Next. 8. In the Task Selection dia- log box, click Drivers and Bootable ISO. Click Next.
  • Page 148 NLITE and AHCI Installation Guide 9. Click Insert and then se- lect Multiple driver folder to select the drivers you will integrate. Click Next. Select only the drivers appropriate for the Win- dows version that you are using and then click OK. Integrating 64-bit driv- ers into 32-bit Windows or vice versa will cause...
  • Page 149 NLITE and AHCI Installation Guide If you are uncertain of the southbridge chip used on your motherboard, select all RAID/AHCI con- trollers and then click Click Next.
  • Page 150 NLITE and AHCI Installation Guide The program is currently integrating the drivers and applying changes to the installation. 14. When the program is fin- ished applying the chang- es, click Next.
  • Page 151 NLITE and AHCI Installation Guide To create an image, se- lect the Create Image mode under the General section and then click Next. 16. Or you can choose to burn it directly to a disc by selecting the Direct Burn mode under the General section.
  • Page 152 NLITE and AHCI Installation Guide You have finished cus- tomizing the Windows XP installation disc. Click Finish. Enter the BIOS utility to configure the SATA con- troller to RAID/AHCI. You can now install Windows...
  • Page 153 NLITE and AHCI Installation Guide AHCI The installation steps below will guide you in configuring your SATA drive to AHCI mode. 1. Enter the BIOS utility and configure the SATA controller to IDE mode. 2. Install Windows XP but do not press F6. 3. Download relevant RAID/AHCI driver files supported by the motherboard chipset from Intel’s website. Transfer the downloaded driver files to C:\AHCI. 4. Open Device Manager and right click on one of the Intel Serial ATA Storage Controllers, then select...
  • Page 154 NLITE and AHCI Installation Guide 5. In the Hardware Update Wizard dialog box, select “No, not this time” then click Next. 6. Select “Install from a list or specific location (Ad- vanced)” and then click Next. 7. Select “Don’t search. I will choose the driver to install”...
  • Page 155 NLITE and AHCI Installation Guide 8. Click “Have Disk”. 9. Select C:\AHCI\iaAHCI.inf and then click Open. Select the appropriate AHCI Controller of your hardware device and then click Next.
  • Page 156 NLITE and AHCI Installation Guide A warning message ap- peared because the se- lected SATA controller did not match your hardware device. Ignore the warning and click Yes to proceed. Click Finish. The system’s settings have been changed. Win- dows XP requires that you restart the computer.

  • Page 157: Appendix B - Watchdog Sample Code

    Watchdog Timer Appendix B - Watchdog Sample Code ;Software programming example: ;--------------------------------------------- ;(1) Enter Super IO Configuration mode ;--------------------------------------------- DX,2EH AL,87H DX,AL DX,AL ;------------------------------------------------------------------------------------------- ;(2) Configuration Logical Device 7, register CRF5/CRF6 (WDT Control /WDT timer) ;------------------------------------------------------------------------------------------- DX,2EH AL,07H ;Ready to Program Logical Device DX,AL DX,2FH AL,07H...

  • Page 158: Appendix C - System Error Message

    System Error Message Appendix C - System Error Message When the BIOS encounters an error that requires the user to correct something, either a beep code will sound or a message will be displayed in a box in the mid- dle of the screen and the message, PRESS F1 TO CONTINUE, CTRL-ALT-ESC or DEL TO ENTER SETUP, will be shown in the information box at the bottom.
  • Page 159 System Error Message Hard Disk(s) fail (20) HDD initialization error. Hard Disk(s) fail (10) Unable to recalibrate fixed disk. Hard Disk(s) fail (08) Sector Verify failed. Keyboard is locked out - Unlock the key The BIOS detects that the keyboard is locked. Keyboard controller is pulled low. Keyboard error or no keyboard present Cannot initialize the keyboard.

  • Page 160: Appendix D - Troubleshooting

    Troubleshooting Appendix D - Troubleshooting Troubleshooting Checklist This chapter of the manual is designed to help you with problems that you may encounter with your personal computer. To efficiently troubleshoot your system, treat each problem individually. This is to ensure an accurate diagnosis of the problem in case a problem has multiple causes.

  • Page 161: Power Supply

    Troubleshooting The picture seems to be constantly moving. 1. The monitor has lost its vertical sync. Adjust the monitor’s vertical sync. 2. Move away any objects, such as another monitor or fan, that may be creating a magnetic field around the display. 3.

  • Page 162: Hard Drive

    Troubleshooting Hard Drive Hard disk failure. 1. Make sure the correct drive type for the hard disk drive has been entered in the BIOS. 2. If the system is configured with two hard drives, make sure the bootable (first) hard drive is configured as Master and the second hard drive is config- ured as Slave.
  • Page 163 Troubleshooting System Board 1. Make sure the add-in card is seated securely in the expansion slot. If the add-in card is loose, power off the system, re-install the card and power up the system. 2. Check the jumper settings to ensure that the jumpers are properly set. 3.

Table of Contents