Table of Contents
Advertisement
3
BIOS Setup
ACPI Power Management Configuration
This section is used to configure the ACPI Power Management.
ACPI Power Management Configuration
ACPI Sleep State
Resume by PME
Resume by Ring
Resume by RTC Alarm
ACPI Sleep State
Selects the highest ACPI sleep state the system will enter when the Suspend
button is pressed.
S1(POS)
S3(STR)
Resume by PME
Enable this field to use the PME signal to wake up the system.
Resume by Ring
Set this field to Enabled to use the modem ring-on function. This will allow
your system to power-on to respond to calls coming through an external or
internal modem.
Resume by RTC Alarm
When Enabled, the system uses the RTC to generate a wakeup event.
56
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Advanced
[S3 (Suspend to RAM) ]
[Disabled]
[Disabled]
[Disabled]
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Enables the Power On Suspend function.
Enables the Suspend to RAM function.
Select the highest ACPI
sleep state the system will
enter, when the SUSPEND
button is pressed.
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
Advertisement
Table of Contents
