Send From Screen - Yamaha TF5 Reference Manual

3 Φ (phase) button
Allows you to reverse the phase.
When turned on, the output signal's phase is reversed.
4
OMNI OUT button
Displays the number of the OMNI OUT to which the channel is directed.
Up to two numbers can be displayed. For three or more numbers, "+" is displayed.
Displays the OMNI OUT screen. (page
5
Recall Safe button (V1.1 and later)
Turns recall safe on and off for the corresponding channel.
You can display the RECALL SAFE screen by touching the jump button in the right corner
of the Recall Safe button.
21)

SEND FROM screen

Allows you to send signals from the input channels.
1
ON button
Determines whether a signal is sent (on) or not sent (off) from the corresponding input
channel.
2
Send pan slider
Adjusts the pan of the input channel signal that is sent.
For AUX 1–8, this slider is only displayed if the signal type is set to stereo.
3
Send level slider
Determines the amount of signal sent from the corresponding input channel.
4
Pre button
Allows you to select whether the pre-fader or post-fader signal is sent from the
corresponding input channel.
On: Before the fader
Off: After the fader
- 69 -
Configuration screens
TF Series
Reference Manual