Toolbar - Yamaha TF5 Reference Manual

FUNCTION PARAMETER1 PARAMETER2
Inc
Dec
CH 1–40,
ST IN 1L–ST IN 2R
CH Select
FX1L–FX2R,
Specific CH AUX 1–8,
AUX 9–20,
STEREO L, STEREO R,
SUB
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
CUE Specific CH DCA 1–8,
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB
FX 1, FX 2,
Effect Bypass
INS FX 1–6
Help
Meter Peak Hold ON
Output
STEREO, SUB,
Monitor
ST IN 1, ST IN 2,
Source Select
USB 33/34,
Playback
Oscillator On
AUX 1–20,
Oscillator
Specific CH STEREO L, STEREO R,
SUB
Bookmark
Page Change
Bookmark with
"SEL"
Close Popup
Play/Pause
Stop
Next
Previous
Recorder Transport
Rec
Auto Rec
Rec & Start
Description
Select channels in order of the direction
selected for PARAMETER 1.
Selects the channel assigned to
PARAMETER 2.
Turns the cue on and off for the channel
assigned to PARAMETER 2.
Bypasses the effect assigned to
PARAMETER 2.
Displays help information.
Turns the peak hold on and off.
Turns the monitor out on and off.
Selects the monitor source assigned to
PARAMETER 2.
Turns the oscillator on and off.
Turns the oscillator sent to the channel
assigned to PARAMETER 2 on and off.
Press and hold for more than 2 seconds to
bookmark the current screen. Press and hold
for less than two seconds to display the
bookmarked screen.
The selected channel is saved with the
bookmark. Same as above.
Closes the popup screen.
Same as the Play/Pause button on the
RECORDER screen.
Same as the Stop button on the RECORDER
screen.
Same as the Next button on the RECORDER
screen.
Same as the Previous button on the
RECORDER screen.
Same as the Rec button on the RECORDER
screen.
Recording stops and the file is saved, and
then recording resumes immediately as a
new file.
Recording starts immediately without
entering record-ready mode.
- 28 -
FUNCTION PARAMETER1 PARAMETER2
Inc
Dec
Store
Recall
Inc Recall
SCENE
Dec Recall
A00–99,
Direct Recall/Store
B00–99
3
Knobs button
Allows you to assign features to the [USER DEFINED KNOBS].
4
Knob setup buttons
Touch the desired button to display the screen that allows you to assign features to the
corresponding [USER DEFINED KNOBS].
Features that can be assigned to [USER DEFINIED KNOBS]
Features
No Assign No feature is assigned
CH Name Adjusts the brightness of the CH NAME.
CH Color Adjusts the brightness of the CH COLOR indicator.
Brightness
Screen Adjusts the brightness of the touchscreen.
Panel Adjusts the brightness of the panel LEDs.
Monitor Level Adjusts monitor level.

Toolbar

Description
Same as the INC, DEC, STORE, and RECALL
keys.
Recalls the next numbered Scene.
Recalls the previous numbered Scene.
Recalls the Scene number assigned to
PARAMETER 2. Press and hold for more than
two seconds to assign the current settings to
that Scene number.
Knob setup buttons
Description
TF Series
Reference Manual