Fx Screen (Fx1/2, Ins Fx1-6) - Yamaha TF5 Reference Manual

FX screen (FX1/2, INS FX1–6)
Allows you to select an effect and edit its parameters.
1
Send button
Displayed for CH 1–40, ST IN 1 and ST IN 2.
Determines whether a signal is sent (on) or not sent (off) to the FX return channel.
2
EFFECT TYPE button
Displays the EFFECT TYPE screen (page
3
Effect type and name
Displays the type and name of the current effect.
4
R Safe (recall safe) indicator
Displays the recall safe status of the effects module.
Displays the RECALL SAFE screen.
5
M safe (mute safe) button
Turns mute safe on and off for the effects module.
6
FX send level slider
Displayed for CH 1–40, ST IN 1 and ST IN 2.
Allows you to adjust the amount of signal that is sent to the effects module.
53), where you can select an effect type.
(page 23)
7
Pre button
Displayed for CH 1–40, ST IN 1 and ST IN 2.
Allows you to select whether the pre-fader or post-fader signal is processed by the effect
module.
On: Before the fader
Off: After the fader
8
Parameter selection buttons
Touch to display other parameters available for the current effect.
9
Parameter sliders
Allow you to adjust the parameters available for the current effect.
0
Sync button
Displayed for effects that have a tempo setting, such as delays. When this button is
turned on, the effect's tempo setting can be controlled with the [TAP] button found in
the SENDS ON FADER section of the top panel.
A
Bypass button
Allows you to bypass the effects module.
B
Effects output level meter
Displays the effects output level.
C
CUE button
Turns cue on and off for the effects module.
- 52 -
Configuration screens
TF Series
Reference Manual