Motorola DS3578 Product Reference Manual page 46

3 - 4 DS3578 With FIPS Digital Scanner Product Reference Guide
Troubleshooting (Continued)
Table 3-1
Problem
Digital scanner emits one short
high beep when it is not in use.
Cradle does not work after
following installation
procedures.
Battery does not charge.
NOTE If problems still occur, contact the distributor or Motorola Solutions Support. See
information.
Possible Causes
In RS-232 mode, a <BEL>
character is received and
Beep on <BEL> option is
enabled.
Cradle is not receiving
power.
Cable connections are not
secure.
The digital scanner is not
inserted properly in the
cradle.
Cradle is not properly
connected to the host.
Cradle is outside the
charging temperature range.
Possible Solutions
Normal when Beep on <BEL> is enabled and the
digital scanner is in RS-232 mode.
Check system power.
Reinsert cables properly.
Reinsert digital scanner.
Check that host settings are correct, and connect
the cradle to the appropriate port on the host.
Charge within the recommended temperature of
32° to 104° F (0° to 40° C) nominal, 41° to 95° F
(5° to 35° C) ideal.
page xviii for contact