Drive Sprocket Removal; Drive Sprocket Installation - Honda 2004 CRF250X Service Manual

ENGINE REMOVAL/INSTALLATION
DRIVE SPROCKET
REMOVAL
Raise the rear wheel off the ground by placing a
~~:~j~~~~~~iI
workstand or equivalent under the engine.
f
Loosen the axle nut.
Loosen the drive chain adjuster lock nuts and turn
the adjusting bolts clockwise fully.
Remove the bolts, clamp, sprocket cover and
spacer.
Shift the transmission into except neutral position.
Remove the sprocket bolt, thrust washer, collar and
drive sprocket.
INSTALLATION
Install the dflVlJ
Install the drive chain to the drive sprocket.
sprocket WIth
ItS Install the drive sprocket onto the countershaft.
fla r side facmg
our.
7-4
•
•