Canon ScanFront 300 Instructions Manual page 188

You can't choose TIFF when
Gray or Color or Auto color
detection is selected.
You can't choose JPEG when
Binary Mode is selected.
You can't choose Text enhance
when Bleed-through reduction is
selected.
ScanFront Service is not
running.
User is now operating the
device. Please try again after
the user completes operations.
An user has logged in.
Operation is invalid.
Please select user.
The character string includes
invalid character.
The scanner cannot be used with the selected mode and file format
Cause
combination.
Check which mode and file format combinations can be used.
Solution
p. 6-21 and p. 8-20.)
The scanner cannot be used with the selected mode and file format
Cause
combination.
Check which mode and file format combinations can be used.
Solution
p. 6-21 and p. 8-20.)
The scanner cannot be used with the selected mode and setting
Cause
combination.
Check which mode and setting combinations can be used.
Solution
and p. 8-20.)
A ScanFront Service Server does not exist on the network. (A
Cause
ScanFront Service Server has not been configured or is not running.)
Check the ScanFront Service Server settings. In addition, you must start
the ScanFront Service Server before turning ON the ScanFront.
p. 4-6.)
Solution
Configure the ScanFront Service Server settings again in the Web Menu
after checking that the ScanFront Service Server is turned ON to
reenable use of the service.
Cause The ScanFront is being used.
Solution Try again after the ScanFront has finished being used.
Cause Modifying settings is not possible because a user is logged in.
Solution
Make the user log off and then try again.
User data is trying to be exported from the scanner without a user being
Cause
selected at the user settings screen.
Solution Select a user name to export.
Invalid characters have been used to set the custom file name or index
Cause
file.
Make sure none of the following characters are used:
Custom file name:
Solution / : ? * " < > |
Index file strings:
& " ' < >
10-10
Chapter 10 Troubleshooting
(See
(See
(See p. 6-21
(See