Canon ScanFront 300 Instructions Manual page 182

Cannot send image files to
devices and folders on different
segments of the network.
Streaks appear in images
Paper becomes jammed
Paper jams occur frequently
Documents are double fed
A stack of documents are fed
together
Scanning starts immediately
after I press a job button (certain
users only)
A ScanFront Service Server does not exist on the network. (A
Cause
ScanFront Service Server has not been configured or is not running.)
Install ScanFront Service on a computer on the same network as the
scanner. (See p. 4-3.)
Solution
implemented, check the necessary settings. In addition, you must start
the ScanFront Service Server before turning ON the ScanFront.
p. 4-6.)
Scan
Cause
The scanning glass is dirty.
Clean the scanning glass.
Solution
scanning glass, contact your local authorized Canon dealer.
Cause The rollers are dirty.
Solution Clean the rollers.
Cause The rollers (consumable parts) have worn out.
Purchase an Exchange Roller Kit and then replace the rollers.
Solution
p. 9-8.)
Static electricity is causing the pages of the document to stick to each
Cause
other.
Solution
Before you load a stack of documents, fan the documents.
Cause
The type of paper of the documents is causing a paper feed error.
Load no more than ten pages of documents.
Solution
feeding to scan the pages one by one.
Cause The feed selection lever is set to Page Separation OFF.
Solution Set the feed selection lever to page separation feeding.
The job buttons are designed to work that way.
Cause
Screen" on p. 6-21 and p. 8-18.
Solution Place the document and then press a job button.
10-4
Chapter 10 Troubleshooting
If a ScanFront Service Server has been
(See p. 9-3.) If there are scratches on a
(See p. 9-3.)
(See p. 2-10.)
See "Skip Scan Setting
(See
(See
Use bypass
(See p. 2-5.)