Paper Handling - Fujitsu DL7400 Installation Manual

Hide thumbs Also See for DL7400:

15. Make sure the Fujitsu DL7400 icon is

added to Printers and Faxes section.

Paper Handling

Adjusting for paper thickness

Fujitsu DL7400 Dot Matrix Printer will be used as an example in this section.

1. Use the MANUAL GAP DIAL to adjust the paper thickness manually. This printer can handle paper

up to 8-ply. For the Ezyfreight AWB print form which comes with 2-ply, please adjust the MANUAL

GAP DIAL to "2" as shown below.

As there are limited copies of AWB print form, please use 1-ply only on the sample test print, for the

purpose to verify the alignment is correct or not. Please temporary adjust the MANUAL GAP DIAL to

"1" for the sample test print and roll back to "2" after sample test print completed.

Installation guide for Fujitsu Dot Matrix Printer_1.6

Page 18

Table of Contents