Fujitsu DL7400 Installation Manual page 35

Hide thumbs Also See for DL7400:

Pre-setup Before Sample Test Print on Cathay Pacific (GalaCXy) Workstations

Note: Only perform the following steps if you are installing on a Cathay Pacific Workstation (i.e.

GalaCXy PC). If you are in doubt please check with the local outport contact person for

confirmation.

If you have not already done so, logon the computer using an account with local administrator rights.

Click on "Logon Workstation Only".

CX "local administrator" Username and Password:

GalaCXy ID

SPF#PRI01

SPF#PRI02

1. Open the CASPOL.ZIP file downloaded in "

section.(Alternate internet download link :

Unzip the CASPOL.ZIP file into drive C (MUST unzip into C:\, folder name called CASPOL), the folder

location and files must be the same as below, otherwise the batch files cannot be run successfully.

Installation guide for Fujitsu Dot Matrix Printer_1.6

Password

spfpri01

spfpri02

Prerequisites for Fujitsu engineer

http://ftp.fhk.com.hk/Download/CASPOL.zip

)

Page 35

Table of Contents