Camera Setup; To Set The Sensor; To Set Ssdr (Samsung Super Dynamic Range) - Samsung SND-L5083R User Manual

setup screen

camera setup

You can change the camera settings according to the environment where the camera is
located.
1. From the Setup menu, select the
<video & audio (
2. Click <camera setup>.
3. Configure the settings as necessary of :
Sensor, SSDR, White balance, Back
light, Exposure, Day/Night, Special,
OSD, IR
4. When done, click [apply (
If a certain time (timeout: 240s) is elapsed with
`
your not pressing the [Apply (
button after changing the settings, your
changes will not be applied.

to Set the Sensor

It specifies how many frames the camera CMOS sensor will capture per second.
1. Select <Sensor>.
2. Select <mode>.
Refer to "Video profile" for the framerate setup range of the <Video profile> according to mode
`
M
setup. (Page 77)

to Set SSDr (Samsung Super Dynamic range)

In a scene where the difference between bright and dark is severe, you can increase the
brightness of the dark area alone to regulate the overall brightness.
1. Select <SSDr>.
2. Set <mode> to <on>.
3. Configure the <Level> and <D-range>
settings as necessary.
• Level : Adjust the level of the dynamic range.
• D-Range : Select the amplitude area of the dynamic range.
90_ setup screen
)> tab.
)].
)]