Samsung SND-L5083R User Manual page 26

overview
Item
Lens
a
Illumination Sensor
b
IR LED
c
Zoom control lever
d
Focus control lever
e
Reset Button
f
Micro SD Memory
g
Card Compartment
Audio input terminal
h
PoE Connector
i
26_ overview
Lens for the camera.
Detects incoming light to control the IR LED.
These infrared LED's are controlled by the illumination sensor.
T Zoom in (Tele)
W Zoom out (Wide)
By rotating it to the right or the left, the lens zoom can be adjusted. By
rotating it clockwise, the zoom can be fixed.
N Focusing on a near object (Near)
F Focusing on a far object (Far)
By rotating it to the right or the left, the focus can be controlled. By rotating it
clockwise, the focus can be fixed.
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
If you reset the camera, the network settings will be adjusted so that
J
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
Compartment for the Micro SD memory card.
Terminal to connect to audio cables.
Connects to the network and supplies power through Ethernet cable.
Description