System Board - HP ENVY x360 m6 Convertible Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal material.
All system boards use the following part numbers:
xxxxxx-001: Windows 7 or non-Windows operating systems
xxxxxx-501: Windows 8.1 Standard operating system
xxxxxx-601: Windows 8.1 Professional or Windows 10 operating system
Description
System board for use in models with 2 GB of discrete graphics memory:
●
Intel Core i7-5500U processor
●
Intel Core i7-5200U processor
System board for use in models with UMA graphics:
●
Intel Core i7-5500U processor
●
Intel Core i5-5200U processor
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the top cover (see
NOTE: When replacing the system board, be sure that the following components (as applicable) are
removed from the defective system board and installed on the replacement system board:
●
WLAN module (see
●
Solid-state drive (see
●
Memory modules (see
●
Heat sink (see
Remove the system board:
1. Disconnect the following cables from the system board:
(1): Display cable
(2): Touch board cable
(3): USB/card reader board cable
(4): Battery cable
(5): Speaker cable
38 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Top cover on page
WLAN module on page
Solid-state drive (M.2) on page
Memory module on page
Heat sink on page 44)
26).
33)
31)
41)
Spare part number
807540-xxx
827523-xxx
808410-xxx
807538-xxx
807537-xxx
827522-xxx