Husqvarna TE 250R 2013 Operation And Maintenance page 21

STOPPING THE MOTORCYCLE AND THE ENGINE
- Close the throttle (1) completely so that the engine will help slow
down the motorcycle.
- For normal braking, gradually apply both front and rear brakes
while down shifting (for maximum deceleration, apply the front
and rear brakes firmly).
- Before the motorcycle stops, pull the clutch lever and shift gear
lever (2) into neutral position.
1
2
EN - 20 SPECIFICATIONS - OPERATION - MAINTENANCE
- Press the engine stop button (3).
3
3
WARNING*: Independent use of the front or
rear brake may be advantageous under cer-
tain conditions. Use caution when using the
front brake, especially on slippery surfaces.
Improper use of the brakes can lead to a se-
rious crash.
In the event of a stuck throttle
WARNING*:
or other malfunction that causes the en-
gine to run uncontrollably, pull the clutch
lever IMMEDIATELY and press the engine
stop switch. Control the motorcycle by nor-
mal use of the brakes and steering while
holding the engine stop button down.
TXC
TE