Tray Full - Ricoh D065 Service Manual

Hide thumbs Also See for D065:

Table of Contents

2.4 TRAY FULL

A pair sensors are used to detect the tray full condition. At the start of every job:

Tray full sensor (Emitter) [A] emits a signal to tray full sensor (Receptor) [B].

As long as the signal remains unbroken the multi-folder will continue to operate and

feed folded paper to the top of the unit [C].

When the top of the stack grows high enough to interrupt the signal between the tray full

sensors [D], this will signal the machine to shut down the line temporarily.

After the operator removes the stack from the top tray, folding and paper exit will

Table of Contents