Samsung SNR-6400 User Manual page 69

The following chart displays the various log types.
<System Log>
Log Type
Power On
Power Off
System Rebooting
Record On
Record Off
HDD Format
Camera Connection
Config Changed
HDD Full
HDD Added
HDD Removed
RAID Build Start
RAID Build Finish
RAID Unbuild
RAID Rebuild Start
Event Group Created
Event Group Deleted
Key Lock On
Key Lock Off
HDD Test
Log File Export
Firmware Update
Set Default
Factory Reset
RAID Error
HDD Check Error
HDD I/O Error
Upgrade Error
Fan Fail
Network Status
Camera Connection Error
Config Exported
Config Imported
Power was turned on.
Power was turned off.
System re-booted.
Started to record video.
Finished recording video.
An HDD was formatted.
A camera was connected.
Product configuration was changed.
Capacity limit for HDD was reached/exceeded.
An HDD was added.
Removing HDD.
Started building a RAID array.
Completed building a RAID array.
A RAID array has been removed.
RAID was rebuilt.
An Event Group was created.
An Event Group was deleted.
Key Lock was locked.
Key Lock was unlocked.
HDD disk-checking was performed.
A log was exported.
Firmware was updated.
Set Default was executed via Web Viewer.
Factory Reset was performed using the front panel button.
A RAID error occurred.
An HDD checking error occurred.
An HDD encountered an I/O error.
A firmware update error occurred.
The system's fan failed.
Connection to network was either lost or re-established.
An error occurred while connecting to a camera.
Product settings were exported to the monitoring computer.
Old product settings were imported and restored.
67
Description
User's Manual