Table of Contents
Advertisement
Network Video Recorder SNR-6400/3200
Formatting HDD
is in Progress...
HDD Format
While an HDD is being formatted, an HDD is in the disk checking process, or a new RAID
mode is being configured, the product cannot be used to format another new HDD; the
button is not displayed even if you select an HDD in the list.
Selecting a NAS and then clicking
deletes the entire video data of a selected NAS.
New Repeated Recording setting is applied only if you click
top of the screen.
Note
RAID Mode
In the RAID Mode menu, you can change the system RAID settings. To change the settings,
select Normal, RAID1, or RAID5, and then click
RAID mode. Upon applying new RAID settings, the system automatically reboots itself; you
will be disconnected from Web Viewer. The system requires approximately 2 minutes to
reboot and establish a network connection.
While the new RAID settings are being applied, the front LCD displays the following
messages according to the progress.
Preparing RAID1
is in Progress...
Rebooting system
is in Progress...
Build RAID1: 48.8%
Finish: 37.6min
RAID1 Setup
Unbuilding RAID
is in Progress...
Rebooting system
is in Progress...
[DONE]
[DONE]
does not format the entire NAS; it only
on the right. Normal is the non-
52
at the
- Quick Links:
- Back Panel
Hide quick links:
Advertisement
Table of Contents
