2.2. Back Panel
No.
Name
1
AC IN
2
SMPS FAN
3
DC FAN
4
Monitor Ethernet Port
5
USB Port
6
Power Button
7
Source Ethernet Port
8
SENSOR IN
/ RELAY OUT
9
GROUND
10
Storage Ethernet Port
11
eSATA Port1
12
eSATA Port2
13
eSATA Port3
14
eSATA Port4
15
RS232C Port
Used to connect the product power cable.
This fan cools the power supply.
This fan cools the inside of the product.
A network port that allows the product to connect to a PC to
run Web Viewer.
Used to upgrade the firmware version of the product.
Turns on or off the product.
A network port that connects the product to the video camera.
Used to connect a sensor or alarm.
A terminal that is used to ground the frame to an external
device.
Used to connect NAS (Network Attached Storage) within the
same network.
Used to connect an external HDD.
Used to connect an external HDD.
Used to connect an external HDD.
Used to connect an external HDD.
Unused terminal.
13
Function
User's Manual