Samsung SNR-6400 User Manual page 51

The SNR-6400/3200 can be used in connection with Samsung Techwin network
products as well as with AXIS products. AXIS cameras have, however, limited
Note compatibility with this product, as described below.
Only AXIS cameras that support both VAPIX and MPEG4 output are
compatible with this product.
Audio Encoding: G711 μ-law
ATC Mode: Cannot use ATC.
Camera Search: Cannot search.
Resolution: In Camera Setup page, one of D1, Half D1, or CIF can be selected
as a AXIS resolution. But certain AXIS camera models do not support D1, Half
D1, and CIF resolutions. In this case, please use the following chart to
determine Video Mode and Video Resolution. For instance, if you want to use
CIF video resolution for an AXIS camera, check if 352x240, 320x240, or
352x288 is listed under the resolution in the chart. If one of the sizes is
available, that means that you can use the resolution. If a selected resolution
is not applicable, the product searches for a supported resolution in the order
of D1, Half D1, and CIF, and then changes the resolution automatically. AXIS
cameras that do not support any of the listed resolutions below cannot be
used in connection with the SNR-6400/3200.
Half D1
D1 704x480, 4CIF, 640x480
704x240, 2CIF
CIF 352x240, 320x240
NTSC
49
User's Manual
PAL
704x576
704x288
352x288