Samsung SNR-6400 User Manual page 55

Unbuilding RAID
When the system is in a RAID mode,
Displays the current RAID status of the system along with the information of
RAID-configured HDDs.
While building a RAID mode,
button aborts the RAID building process.
RAID (Redundant Array of Independent Disks) helps you keep data safe in
case the system HDD is damaged.
Selecting RAID1 mode configures HDD1 and HDD2 as one array, and HDD3
Note
and HDD4 as the other array. RAID1 uses 2 physical HDDs as 1 functional
HDD. For instance, configuring HDD1 and HDD2—while each is equipped with
a 500GB HDD—to RAID1 displays the system's functional HDD as one
500GB RAID. In RAID1 mode, no data is lost even if one of the two HDDs of a
[DONE]
appears in the RAID Status screen. Clicking the
appears on the right.
53
User's Manual