Vermont Castings VLI31DVNTSC Installation And Operating Instructions Manual page 21

Vlidv series direct vent gas fireplace insert
Table of Contents

Advertisement

LOG PLAceMeNt
LG833
7. Hold Log #7 with the 'pointy' end of
the log down and the knot in the log
facing forward. Place the right end
on the key provided on the top of log
#5. The 'pointy' end of the log should
protrude through the fettle between
the second and third tines from the
left. The log should NOT rest on
the foot of the left andiron.
Figure 22
Figure 22
83D4009
Log #6
LG833
VLI31 log 6
LG835
Log #7
LG834
VLI31 log #7
Figure 23
VLI31 Fireplace Insert
6. Position Log #6 (the long flat log)
from left to right in the rear of the
firebox with the left side of the log
on the key provided on the top,
rear of log #5 and the right end
on the key on the top rear of log
#. The detailed face of the log
should face forward. Figure 21
Figure 21
8. Place the andirons on the second
tine of the fettle from the left and
right with the feet of the andirons
resting behind the front log bracket
and on the 'lily pads' provided for
the inside feet. Figure 23
LG834
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vli31dvptsc

Table of Contents