Remote Amperage Control On Cc Models (Optional); Weld Control/Arc Condition Information Label - Miller Electric Big 40 CAT Owner's Manual

6-3. Remote Amperage Control On CC Models (Optional)

Example: Combination Remote Amperage Control (Stick)
Set Switches

6-4. Weld Control/Arc Condition Information Label

OM-4406 Page 32
1
Set Range
Return To Table Of Contents
1
Connect optional remote control to
RC13 (see Section 5-10).
Range = 100 to 205 A DC
Percentage Of Range = 50%
Max = About 153 A DC (50% of 100 to 205)
Max (153 A DC)
Set Control
.
Set weld controls as shown to
achieve softer or stiffer arc condi-
tions for different applications.
Remote Amperage Adjust
Receptacle RC13
In Example:
Min (75 A DC)
Adjust Optional Remote Control
Ref. 154 862-A / Ref. 181 711-A / 802 311
212 944-A