R E M O T E O P E R A T I O N
Turn System Off
Press 0 0.
Turn System On
When the system is off, it answers after 10
rings, announces "The machine is off," and
beeps twice.
Press 0 to turn the system on.
1
2
The system beeps twice and is ready
to answer calls and record messages.
If the system beeps five times, the
memory is full.
Memory Full
The system answers after 10 rings, then
announces "Memory is full," and beeps
twice, you must delete messages to make
room for new ones.
1
Enter the Remote Access Code after
two-beep signal.
2
Listen to messages, and delete some
or all of them.
Press 0 to make sure your system is
3
on before you hang up.
6