Installation; Before You Install; Turn System On/Off - AT&T 1722 User Manual

Before You Install

Choose a location for the answering system
near a modular telephone jack and a
standard electrical outlet not controlled
by a wall switch.
NOTE: If you do not want to connect
a telephone, skip Step 2.
2 Connect the
telephone
(optional).

Turn System On/Off

Before proceeding to set up features, press
O to turn the system on. To turn the
system off, press O again.
When the system is off, the indicator above
the PLAY/STOP button is off and the
Message Window is blank.

INSTALLATION

1 Connect the telephone
line cord.
1
Use only the power cord supplied
with this product. If you need a
replacement, call
3111
. Input: 120 V, 60 Hz.
Output: 6V AC, 350 mA.
Standard
Electrical
Outlet
Strain-relief tab
Modular
Telephone
Jack
NOTE: If the Message Window is blank
make sure the power cord is securely
connected to both the answering system
and an electrical outlet not controlled by
a wall switch. Press O to make sure
the system is on.
1-800-222-
3 Connect the
power cord.