Connecting To Remote 14 Receptacle Rc14 On Cc/Cv Models - Miller Electric Big 40 C Owner's Manual

5-11. Connecting To Remote 14 Receptacle RC14 On CC/CV Models

*The remaining sockets are not used.
Notes
Start Your Professional
Welding Career Now!
OR
Ref. 803 602
400 Trade Square East, Troy, Ohio 45373
1-800-332-9448 www.welding.org
Socket*
A
24 VOLTS AC 24 VOLTS AC
B
C
D
REMOTE
OUTPUT OUTPUT
CONTROL
E
I
115 VOLTS AC
J
K
GND
NEUTRAL G
Over 80,000 trained
since 1930!
Socket Information
24 volts ac. Protected by circuit
breaker CB5.
Contact closure to A completes
24 volt ac contactor control
circuit.
Output to remote control:+10
volts dc in MIG or Stick mode;
0 to +10 volts dc in TIG mode.
Remote control circuit common.
DC input command signal: 0 to
+10 volts from min. to max. of
remote control with Voltage/
Amperage Adjust control at
max.
115 volts, 10 amperes, 60 Hz
ac. Protected by circuit breaker
CB6.
Contact closure to I completes
115 volt ac contactor control
circuit.
Chassis common.
Circuit common for 24 and 115
volt ac circuit.
OM-4427 Page 25