Changing Engine Oil, Oil Filter, And Fuel Filter (Kohler-Powered Units) - Miller Electric 301 G, DC Owner's Manual

9-5. Changing Engine Oil, Oil Filter, And Fuel Filter (Kohler-Powered Units)

Full
Tools Needed:
2
1
Y Stop engine and let cool.
1 Oil Drain Valve
2 Oil Filter
Change engine oil and filter accord-
ing to engine manual.
Y Close valve and valve cap
before adding oil and run-
ning engine.
Fill crankcase with new oil to full
mark on dipstick (see Section 9-2).
3 Fuel Filter
4 Fuel Line
Replace line if cracked or worn.
Install new filter. Wipe up any spilled
fuel.
Start engine, and check for fuel
leaks.
Y Stop engine, tighten connec-
tions as necessary, and wipe
up fuel.
3
4
802 849-A / S-0842
OM-4407 Page 39