Changing Engine Oil, Oil Filter, And Fuel Filter (Robin Eh64-Powered Units) - Miller Electric 301 G, DC Owner's Manual

8-6. Changing Engine Oil, Oil Filter, and Fuel Filter (Robin EH64-Powered Units)

Oil Check
Full
Tools Needed:
OM-4407 Page 34
Oil Fill
2
1
Y Stop engine and let cool.
1 Oil Drain Valve
2 Oil Filter
Change engine oil and filter accord-
ing to engine owner's manual.
Y Close valve and valve cap
before adding
running engine.
Fill crankcase with new oil to full
mark on dipstick (see Section 8-1).
3 Fuel Filter
4 Fuel Line
Replace line if cracked or worn.
Install new filter. Wipe up any spilled
fuel.
Start engine, and check for fuel
leaks.
Y Stop engine, tighten connec-
tions as necessary, and wipe
up fuel.
3
4
803 098 / S-0842
oil and