Routine Maintenance (Robin Eh64-Powered Units) - Miller Electric 301 G, DC Owner's Manual

8-2. Routine Maintenance (Robin EH64-Powered Units)

Note
Follow the storage procedure in the engine owner's manual if the unit will not be used for an
extended period.
Check fluid levels.
See Section 5-2.
Check
spark arrestor screen.
See Section 8-4.
Change oil. See
Section 8-6 and
maintenance label.
Service air
cleaner element.
See Section 8-3.
OM-4407 Page 30
Every 20 h
and clean
Clean and
tighten weld
terminals.
Y Stop engine before maintaining.
.
See also Engine Manual and Maintenance Label for im-
portant start-up, service, and storage information. Ser-
Recycle
vice engine more often if used in severe conditions.
engine
fluids.
* To be done by Factory Authorized Service Agent.
Every 8 h
Wipe up spills.
Service air
cleaner wrapper
(foam element).
See Section 8-3.
Every 50 h
Every 100 h
Clean cooling system.
See Engine Manual.
Clean and
tighten battery
connections.
Every 25 h