Operation - Regency PFLK10 Owner's Manual

O
PERATION
Turn on the power and check operation of the fan. The fan is controlled by the use of the pull chain as follows:
one pull = high speed
two pulls = medium speed
three pulls = low speed
four pulls = off
For proper functions, ensure that the chain is pulled down fully and released each time.
NOTE: Leave pull chain switch in "high speed" position when using optional wall control.
NOTE:
The slide switch on the side of the switch housing controls forward or reverse rotation. Make sure switch is not stuck
between forward and reverse positions.
IMPORTANT: To prevent damage or cause injury, be sure that fan is switched to off and blades have stopped moving IMPORTANT:
completely before attempting to change direction of rotation.
Forward/Reverse Direction:
Warm Weather (forward):
A DOWNWARD airflow creates a cooling effect as shown in Figure 1. This allows you to set your air conditioner on a
warmer setting without affecting your comfort.
Cool Weather (Reverse):
An UPWARD airflow moves warmer air off the ceiling area as shown in Figure 2. This allows you to set your heating
unit on a cooler setting without affecting your comfort.
Fig. 1 Fig. 2
12