Table of Contents
Advertisement
Turn the camera on.
6
Rotate the power switch to turn the
camera on. The power lamp will briefly
light green and the monitor will turn
on. If the lens is equipped with a front
lens cap, remove the cap before shoot-
ing. If a 1 NIKKOR VR 10–30mm f/3.5–
s
5.6 PD-ZOOM lens is attached, the lens
will automatically extend when the
camera is turned on and retract when
the camera is turned off.
A
Turning the Camera Off
To turn the camera off, rotate the power switch again. The monitor
will turn off.
A
Auto Power Off
If no operations are performed for about a minute, the displays will
turn off and the power lamp start to flash. The camera can be reac-
tivated by operating the shutter-release button. If no operations are
performed for about three minutes after the displays have turned
off, the camera will turn off automatically.
7
Choose a language.
A language-selection dialog will be
displayed the first time the camera is
turned on. Use the multi selector and
J button (0 9) to choose a language.
24
Advertisement
Table of Contents
