Error Messages - Nikon 1 V3 User Manual

Hide thumbs Also See for 1 V3:
Table of Contents

Advertisement

Error Messages

This section lists the error messages that appear in the display.
Message
(Shutter-speed or
aperture display
flashes)
Keeping the zoom ring
button pressed, rotate
the zoom ring to
extend the lens.
Check lens. Pictures
can only be taken
when a lens is
attached.
Lens error.
Try again after turning
the camera off and on.
The clock has been
reset.
No memory card.
This memory card
n
cannot be used. Card
may be damaged;
insert a different card.
122
If the subject is too bright, lower ISO sensitivity
or choose a faster shutter speed or smaller aper-
ture (higher f-number).
If the subject is too dark, raise ISO sensitivity, use
a flash, or choose a slower shutter speed or
larger aperture (lower f-number).
A lens with a retractable lens barrel button is
attached with the lens barrel retracted. Keeping
the retractable lens barrel button pressed,
rotate the zoom ring to extend the lens.
Attach a lens.
Turn the camera off and then on again. If the
problem persists or reoccurs frequently, contact
a Nikon-authorized service representative.
Set the camera clock.
Turn the camera off and confirm that the card is
correctly inserted.
• Use an approved card.
• Format the card. If the problem persists, the
card may be damaged. Contact a Nikon-autho-
rized service representative.
• Insert a new memory card.
Solution

Advertisement

Table of Contents
loading

Table of Contents