Table of Contents
Advertisement
Flash units When mounted on the Nikon 1 V3, the following flash units
Remote
controls
Micro-
phones
Multi acces-
sory port
accessories
GPS units
n
Body caps
A
Optional Accessories
Availability may vary with country or region. See our website or bro-
chures for the latest information.
110
support i-TTL and manual flash control.
• Speedlight SB-N5:The SB-N5 has a Guide Number of 8.5/27.9
(m/ft, ISO 100, 20 °C/68 °F; Guide Number at ISO 160 is
10.8/35.4).
• Speedlight SB-N7: The SB-N7 has a Guide Number of 18/59
(m/ft, ISO 100, 20 °C/68 °F; Guide Number at ISO 160 is
22.8/74.8).
Wireless Remote Control ML-L3 (0 79): The ML-L3 uses a 3 V
CR2025 battery.
Pressing the battery-chamber latch to the right (q), insert a
fingernail into the gap and open the battery chamber (w).
Ensure that the battery is in the correct orientation (r).
Stereo Microphone ME-1: Connect the ME-1 to the camera micro-
phone jack to record stereo sound while reducing the noise
caused by lens vibration being recorded during autofocus.
Multi Accessory Port Adapter AS-N1000: The AS-N1000 fixes
optional ME-1 stereo microphones to the Nikon 1 V3.
GPS Unit GP-N100: Record the time (UTC) and the camera's cur-
rent latitude, longitude, and altitude with every picture
taken. Note that the built-in flash can not be used when the
GP-N100 is attached.
Body Cap BF-N1000: The body cap keeps the image sensor free
of dust when a lens is not in place.
Advertisement
Table of Contents
