Connections With A Cc Welding Power Source And A 115 Vac/12 Vdc Secondary Contactor; Removing Top Cover Of Pistol Grip Gun - Miller Electric XR A Owner's Manual

4-4. Connections With A CC Welding Power Source And A 115 VAC/12 VDC Secondary
Contactor
1
2
3
4

4-5. Removing Top Cover Of Pistol Grip Gun

OM-1581 Page 12
5
1
10
11
9
8
7
6
1 Constant Current (CC) Weld-
ing Power Source
2 Workpiece
3 Voltage Sensing Lead
4 Gun
5 Wire Feeder
6 3-Conductor 115 VAC Cord
7 3-Conductor Contactor Con-
trol Cord
8 5-Pin Plug
9 Secondary Contactor
10 Gas Cylinder
11 115 VAC Plug
Obtain plug for wire feeder.
151 777-F
1 Top Cover Triangular Boss
Push up on triangular boss to open
door. Door hinges on handle.
To open door fully, push up on door
until it clicks into position.
.
If door is pushed too far it will
separate from handle. If this
happens the door can be rein-
stalled.
Push door back into original posi-
tion to close.
802 528-C