Miele TX3587 Operating And Installation Instructions page 113

Problem
F 33 appears in the
display.
F xx appears in the
display.
No water is being taken
in with the Moisture plus
d function.
The rack and other
accessories make a
noise when being
pushed into or pulled
out of the oven.
Possible cause and remedy
The door lock for the Pyrolytic cleaning programme is
not being released.
^ Turn the function selector to ß and switch the oven off
with the K sensor.
If the door lock still does not release itself call the Miele
Service Department.
There is a problem that you cannot resolve.
^ Call the Miele Service Department.
Demo mode is activated. The oven can be operated
but the pump for the steam injection system does not
work.
Deactivate demo mode (see "Settings – P 9").
The pump for the steam injection system is faulty.
^ Call the Miele Service Department.
The pyrolytic resistant surface of the side runners
creates friction when accessories are being pushed
into or pulled out of the oven.
To reduce the friction, add a few drops of heat resistant
cooking oil to some kitchen paper and use this to
lubricate the side runners.
Repeat this after each pyrolytic cleaning process.
Problem solving guide
113