Miele TX3587 Operating And Installation Instructions page 112

Problem solving guide
Problem
The oven does not heat
up.
A function has been
selected but the oven is
not working.
i2:00 will appear in the
display with the triangle
V flashing under +.
0:00 appears
unexpectedly in the
display and T is
flashing at the same
time. The buzzer might
also be sounding.
F 32 appears in the
display.
112
Possible cause and remedy
Demo mode has been activated. MES_ appears in the
display.
The oven can be operated but does not heat up.
^ Deactivate demo mode (see "Settings – P 9").
There has been a power cut which has caused a
current process to stop.
^ Turn the function selector to the ß position and switch
the oven off.
Start the cooking process again.
The power supply was interrupted for longer than 200
hours.
^ Reset the time of day (see "Using for the first time").
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
^ Turn the function selector to ß and switch the oven
off. The oven is now ready to use again immediately.
The Pyrolytic cleaning programme door lock is not
locking.
^ Turn the function selector to ß and select the required
pyrolytic cleaning programme again.
If the fault code appears in the display again call the
Miele Service Department.