Section 4 − Installation; Specifications - Miller Electric Maxstar 200 STR Owner's Manual

4-1. Specifications

Input Power Input Power Rated Output Rated Output
Three-Phase
150 A @ 26 VDC,
60% Duty Cycle
Stick Process
Three-Phase
175 A @ 17 VDC,
60% Duty Cycle
TIG Process
Three-Phase 200 A @ 28 VDC,
Stick Process 30% Duty Cycle
Three-Phase 200 A @ 18 VDC,
TIG Process 40% Duty Cycle
Single-Phase
150 A @ 26 VDC,
60% Duty Cycle
Stick Process
Single-Phase
175 A @ 17 VDC,
60% Duty Cycle
TIG Process
Single-Phase
125 A @ 25 VDC,
50% Duty Cycle
Stick Process
Single-Phase
150 A @ 16 VDC,
70% Duty Cycle
TIG Process
Single-Phase
100 A @ 24 VDC,
80% Duty Cycle
Stick Process
Single-Phase
125 A @ 15 VDC,
100% Duty Cycle
TIG Process
*While idling
Low open-circuit voltage while in Lift-Arct on all models, and Stick on models with stock numbers 907 036 and 907 037.
Normal open-circuit voltage (80 volts) is present while in the Stick process for models with stock number 907 220.
NOTE: Duty cycle limitations on units with 115 volt input power are due to the input power cord supplied with the unit.
NOTE: This unit is equipped with Auto-Linet. The Auto-Line circuitry automatically connects to 120−460 VAC, single- or three-phase power without
removing the cover to relink the power source.
OM-2233 Page 12
SECTION 4 − INSTALLATION
Welding Max.
Amperage Amperage Open-Circuit Open-Circuit
Range Voltage
80
1 − 200
9-14
80
1 − 200
9-14
80
1 − 200
9-14
80
1 − 200
9-14
80
1 − 200
9-14
80
1 − 200
9-14
80
1 − 200
9-14
80
1 − 200
9-14
80
1 − 200
9-14
80
1 − 200
9-14
Amperes Input At Rated Output, 50/60Hz
115 230 400
13.1 7.4
-−
0.16* 0.24*
10.5 6.0
-− 0.16* 0.24*
18.4 10.3
0.16* 0.24*
12.7 7.2
0.16* 0.24*
21.7
-− -−
0.23*
17.4
-−
-− 0.23*
34.1
-− -−
0.42*
29.7
-− -−
0.42*
28.1
-− -−
0.42*
23.0
-− -−
0.42*
KVA KVA KW KW
460
6.4 5.2 5.0
0.25* 0.06* 0.03*
5.2 4.2 4.0
0.25* 0.06* 0.03*
8.9 7.3 7.0
0.25* 0.06* 0.03*
6.2 5.1 4.9
0.25* 0.06* 0.03*
10.6
5.0 5.0
0.05* 0.02*
.25*
8.5 4.0 4.0
.25* 0.05* 0.02*
4.0 3.8
-−
0.05* 0.03*
3.4 3.4
-−
0.05* 0.03*
3.2 3.2
-−
0.05* 0.03*
2.6 2.6
-−
0.05* 0.03*