Section 2 - Specifications; Pulse Control; Section 3 - Installation - Miller Electric MMP Owner's Manual

2-1. Pulse Control

Specification
Overall Dimensions
Weight
Input Power Cord With Plug
Additional Required Equipment
Welding Power Source Type Needed
Wire Feeder Type Needed
3-1. Connections To Welding Power Source And Optional Wall-Mounting Procedure
SECTION 2 – SPECIFICATIONS
Height: 8-1/4 in (210 mm); Width: 7-3/8 in (187 mm); Depth: 4-3/4 in (121 mm)
Net: 7 lb (3.2 kg); Ship: 12 lb (5.4 kg)
20 ft (6.1 m)
Welding Power Source And Wire Feeder
Constant Current (CC) DC, With Suitable Remote 17 Receptacle
Constant Speed
SECTION 3 – INSTALLATION
1
3
2
Description
1 Welding Power Source
Turn Off welding power source.
2 Remote 17 Receptacle
3 17-Pin Plug PLG3
Connect plug to Remote 17 recep-
5
tacle on welding power source.
4 Mounting Bracket
Mounting holes are 4 in (102 mm)
apart.
5 User-Supplied Mounting
4
Hardware
ST-152 642
OM-814 Page 5