Table of Contents
Advertisement
4
Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press M N. a MOKN
5
Set the desired time. a MOKN
R You can select 24-hour or 12-hour
clock format ("AM" or "PM") by
pressing *.
6
Enter a text memo (10 characters max.).
a MOKN
7
MbN: Select the desired alarm tone. a
MOKN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8
MbN: Select the desired snooze setting.
a MOKN
9
MOKN a MeN
Note:
R Press M
N to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or M
sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Night mode
Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set for each unit.
Using the phonebook's category feature
(page 20), you can also select categories of
callers whose calls override night mode and
ring the handset (Caller ID subscribers only).
Important:
R Make sure the unit's date and time setting
R If you have set the handset alarm, the
Turning night mode on/off
1
2
3
4
5
Changing the start and end time
N to stop the
1
2
Setting the ring delay
This setting allows the handset to ring during
night mode if the caller waits long enough.
After the selected amount of time passes, the
handset rings. If you select "No Ringing",
the handset never rings during night mode.
1
2
Note:
R When the answering system answers the
is correct. The time setting of the system is
configured with the date and time of the
mobile device registered to the hub. If a
mobile device is not registered to the hub,
register it to the hub by following the
instructions in the System Setup Guide of
the hub.
alarm sounds even if the night mode is
turned on.
M
N#238
MbN: Select the desired setting. a MOKN
R If you select "Off", press MeN to
exit.
Enter the desired hour and minute you
wish to start this feature. a MOKN
R You can select 24-hour or 12-hour
clock format ("AM" or "PM") by
pressing *.
Enter the desired hour and minute you
wish to end this feature. a MOKN
MeN
M
N#237
Continue from step 3, "Turning night
mode on/off", page 29.
M
N#239
MbN: Select the desired setting. a MOKN
a MeN
call, this feature does not work.
Programming
29
Advertisement
Table of Contents
